9.6 Image formation by lenses  (Page 3/18)

As noted in the initial discussion of the law of refraction in The Law of Refraction , the paths of light rays are exactly reversible. This means that the direction of the arrows could be reversed for all of the rays in [link] and [link] . For example, if a point light source is placed at the focal point of a convex lens, as shown in [link] , parallel light rays emerge from the other side.

Ray tracing and thin lenses

Ray tracing is the technique of determining or following (tracing) the paths that light rays take. For rays passing through matter, the law of refraction is used to trace the paths. Here we use ray tracing to help us understand the action of lenses in situations ranging from forming images on film to magnifying small print to correcting nearsightedness. While ray tracing for complicated lenses, such as those found in sophisticated cameras, may require computer techniques, there is a set of simple rules for tracing rays through thin lenses. A thin lens is defined to be one whose thickness allows rays to refract, as illustrated in [link] , but does not allow properties such as dispersion and aberrations. An ideal thin lens has two refracting surfaces but the lens is thin enough to assume that light rays bend only once. A thin symmetrical lens has two focal points, one on either side and both at the same distance from the lens. (See [link] .) Another important characteristic of a thin lens is that light rays through its center are deflected by a negligible amount, as seen in [link] .

Using paper, pencil, and a straight edge, ray tracing can accurately describe the operation of a lens. The rules for ray tracing for thin lenses are based on the illustrations already discussed:

1. A ray entering a converging lens parallel to its axis passes through the focal point F of the lens on the other side. (See rays 1 and 3 in [link] .)
2. A ray entering a diverging lens parallel to its axis seems to come from the focal point F. (See rays 1 and 3 in [link] .)
3. A ray passing through the center of either a converging or a diverging lens does not change direction. (See [link] , and see ray 2 in [link] and [link] .)
4. A ray entering a converging lens through its focal point exits parallel to its axis. (The reverse of rays 1 and 3 in [link] .)
5. A ray that enters a diverging lens by heading toward the focal point on the opposite side exits parallel to the axis. (The reverse of rays 1 and 3 in [link] .)