<< Chapter < Page Chapter >> Page >

Making connections

In statics, the net torque is zero, and there is no angular acceleration. In rotational motion, net torque is the cause of angular acceleration, exactly as in Newton’s second law of motion for rotation.

Illustrations of ten different objects accompanied by their rotational inertias.
Some rotational inertias.

Calculating the effect of mass distribution on a merry-go-round

Consider the father pushing a playground merry-go-round in [link] . He exerts a force of 250 N at the edge of the 50.0-kg merry-go-round, which has a 1.50 m radius. Calculate the angular acceleration produced (a) when no one is on the merry-go-round and (b) when an 18.0-kg child sits 1.25 m away from the center. Consider the merry-go-round itself to be a uniform disk with negligible retarding friction.

The given figure shows a man pushing a merry-go-round by a force F, indicated by a red arrow which is perpendicular to the radius r, of the merry-go-round, such that it moves in counter-clockwise direction.
A father pushes a playground merry-go-round at its edge and perpendicular to its radius to achieve maximum torque.

Strategy

Angular acceleration is given directly by the expression α = net τ I size 12{τ=Iα,`α= { { ital "net"τ} over {I} } } {} :

α = τ I . size 12{α= { {τ} over {I} } } {}

To solve for α size 12{α} {} , we must first calculate the torque τ size 12{τ} {} (which is the same in both cases) and moment of inertia I size 12{I} {} (which is greater in the second case). To find the torque, we note that the applied force is perpendicular to the radius and friction is negligible, so that

τ = rF sin θ = ( 1.50 m ) ( 250 N ) = 375 N m. size 12{τ="rFsinθ"= \( 1 "." "50m" \) \( "250N" \) ="375N" "." "m."} {}

Solution for (a)

The moment of inertia of a solid disk about this axis is given in [link] to be

1 2 MR 2 , size 12{ { {1} over {2} } ital "MR" rSup { size 8{2} } ","} {}

where M = 50.0 kg size 12{M="50" "." 0 ital "kg"} {} and R = 1.50 m size 12{R=1 "." "50"m} {} , so that

I = (0 . 500) ( 50.0 kg ) ( 1.50 m ) 2 = 56.25 kg m 2 . size 12{I=0 "." 5 \( "50" "." "0kg" \) \( 1 "." "50m" \) rSup { size 8{2} } ="56" "." "25kg" "." "m" rSup { size 8{2} } "."} {}

Now, after we substitute the known values, we find the angular acceleration to be

α = τ I = 375 N m 56.25 kg m 2 = 6.67 rad s 2 . size 12{α= { {τ} over {I} } = { {"375"`"N" "." "m"} over {"56" "." "25"`"kg" "." "m" rSup { size 8{2} } } } =6 "." "67"` { {"rad"} over {s rSup { size 8{2} } } } "."} {}

Solution for (b)

We expect the angular acceleration for the system to be less in this part, because the moment of inertia is greater when the child is on the merry-go-round. To find the total moment of inertia I size 12{I} {} , we first find the child’s moment of inertia I c size 12{I rSub { size 8{c} } } {} by considering the child to be equivalent to a point mass at a distance of 1.25 m from the axis. Then,

I c = MR 2 = ( 18.0 kg ) ( 1.25 m ) 2 = 28.13 kg m 2 . size 12{I rSub { size 8{c} } ="MR" rSup { size 8{2} } = \( "18" "." 0`"kg" \) \( 1 "." "25"`m \) rSup { size 8{2} } ="28" "." "13"`"kg" "." m rSup { size 8{2} } "."} {}

The total moment of inertia is the sum of moments of inertia of the merry-go-round and the child (about the same axis). To justify this sum to yourself, examine the definition of I size 12{I} {} :

I = 28.13 kg m 2 + 56.25 kg m 2 = 84.38 kg m 2 . size 12{I="28" "." "13"`"kg" "." m rSup { size 8{2} } +"56" "." "25"`"kg" "." m rSup { size 8{2} } ="84" "." "38"`"kg" "." m rSup { size 8{2} } } {}

Substituting known values into the equation for α size 12{α} {} gives

α = τ I = 375 N m 84.38 kg m 2 = 4.44 rad s 2 . size 12{α= { {τ} over {I} } = { {"375N" "." m} over {"84" "." "38kg" "." m rSup { size 8{2} } } } =4 "." "44" { {"rad"} over {s rSup { size 8{2} } } } "."} {}

Discussion

The angular acceleration is less when the child is on the merry-go-round than when the merry-go-round is empty, as expected. The angular accelerations found are quite large, partly due to the fact that friction was considered to be negligible. If, for example, the father kept pushing perpendicularly for 2.00 s, he would give the merry-go-round an angular velocity of 13.3 rad/s when it is empty but only 8.89 rad/s when the child is on it. In terms of revolutions per second, these angular velocities are 2.12 rev/s and 1.41 rev/s, respectively. The father would end up running at about 50 km/h in the first case. Summer Olympics, here he comes! Confirmation of these numbers is left as an exercise for the reader.

Torque is the analog of force and moment of inertia is the analog of mass. Force and mass are physical quantities that depend on only one factor. For example, mass is related solely to the numbers of atoms of various types in an object. Are torque and moment of inertia similarly simple?

No. Torque depends on three factors: force magnitude, force direction, and point of application. Moment of inertia depends on both mass and its distribution relative to the axis of rotation. So, while the analogies are precise, these rotational quantities depend on more factors.

Practice Key Terms 3

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Unit 8 - rotational motion. OpenStax CNX. Feb 22, 2016 Download for free at https://legacy.cnx.org/content/col11970/1.1
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Unit 8 - rotational motion' conversation and receive update notifications?

Ask