2.6 One dimensional motion with constant acceleration  (Page 2/6)

Distance in the interval t = 0 to 1 s is :

$$\begin{array}{l}{s}_1=1-0=1m\\ s_2=4-0=4m\end{array}$$

Total distance is 1 + 4 = 5 m.

6: Velocity is zero, when t = 1 s. In this period, displacement is 1 m.

7: In order to determine the nature of force on the particle, we first determine the acceleration as :

$$\begin{array}{l}a=\frac{đv}{đt}=\frac{đ}{đt}(2t-2)=2m/s^2\end{array}$$

Acceleration of the motion is constant, independent of time. Hence, force on the particle is also constant during the motion.

Equation of motion for one dimensional motion with constant acceleration

The equation of motions in one dimension for constant acceleration is obtained from the equations of motion established for the general case i.e. for the three dimensional motion. In one dimension, the equation of motion is simplified ( r is replaced by x or y or z with corresponding unit vector). The three basic equations of motions are (say in x - direction) :

$$\begin{array}{l}\mathrm{1:}\mathbf{v}=\mathbf{u}+\mathbf{a}t\\ \mathrm{2:}{\mathbf{v}}_{\mathrm{avg}}=\frac{(\mathbf{u}+\mathbf{v})}{2}\\ \mathrm{3:}\Delta x\mathbf{i}=\mathbf{u}t+\frac{1}{2}\mathbf{a}{t}^2\end{array}$$

Significantly, we can treat vector equivalently as scalars with appropriate sign. Following is the construct used for this purpose :

Sign convention

• Assign an axis along the motion. Treat direction of axis as positive.
• Assign the origin with the start of motion or start of observation. It is, however, a matter of convenience and is not a requirement of the construct.
• Use all quantities describing motion in the direction of axis as positive.
• Use all quantities describing motion in the opposite direction of axis as negative.

Once, we follow the rules as above, we can treat equations of motion as scalar equations as :

$$\begin{array}{l}\mathrm{1:}v=u+at\\ \mathrm{2:}{v}_{\mathrm{avg}}=\frac{(u+v)}{2}\\ \mathrm{3:}\Delta x=ut+\frac{1}{2}a{t}^2\end{array}$$

Motion under gravity

We have observed that when a feather and an iron ball are released from a height, they reach earth surface with different velocity and at different times. These objects are under the action of different forces like gravity, friction, wind and buoyancy force. In case forces other than gravity are absent like in vacuum, the bodies are only acted by the gravitational pull towards earth. In such situation, acceleration due to gravity, denoted by g, is the only acceleration.