NONDESTRUCTIVE TESTER Title 32

Air National Guard Units
US - Oklahoma - Tulsa
January 29, 2025

Summary THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for a NONDESTRUCTIVE TESTER (Title 32), Position Description Number D2320000 and is part of the OK 138th Fighter Wing, Oklahoma Air National Guard.
Responsibilities Determines test method, and prepares fluids and parts for nondestructive inspection.
Interprets nondestructive inspection test results, and provides information about defects to repair center.
Performs Oil Spectrometry process and analyzes wear metal content on engine lubricating oil and other fluids, and recommends corrective action.
Establishes radiation areas for radiographic operations.
Computes and monitors personal exposure areas for radiographic operations, and monitors personnel exposure data.
Performs nondestructive inspection on structures, components, and systems.
Detects flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant, eddy current, magnetic particle, radiographic, optical, Thermography, Shearography and ultrasonic test equipment.
Determines metallurgical information of components according to alloy, temper, conductivity, and associated factors.
May also serve as Alternate TMDE Monitor, PCAMS, Alternate Equipment Custodian, Alternate Supplies Manager, Alternate Hazardous Waste Monitor, Alternate Hazardous Communication Monitor, Alternate Spill Prevention Monitor, Alternate FOD Monitor, Alternate Radiation Monitor, Alternate Technical Order Monitor, Alternate Precious Metals Monitor, and Training Monitor.
Applies magnetic particle and/or liquid penetrant inspection to detect and interpret the relevancy of flaws in a variety of parts.
Parts are numerous and varied, and are of ferrous and/or nonferrous metals, and consist of surface or near surface discontinuities in the metal; e.g., fatigue cracks, welding overlap, cold shut, or surface cracks that may stem from internal flaws, such as pipes, inclusions, or forging lap.
Sets up each different liquid penetrant or magnetic particle method following Technical Orders (TOs), Time Change Technical Orders (TCTOs), or Work Control Documents (WCDs), or Nondestructive Testing Instructions (NDIs).
Ensures the equipment and solutions are in compliance with technical guides and quality standards before performing tests and must submit an AFTO 22 if defects in TO's exist or an AF 107 if there is no technical data to accompany the task.
Performs all processing tasks; i.e., dipping items in penetrant or magnetic particle baths, washing and drying, magnetizing and demagnetizing ferrous items, and subjecting them to Ultra Violet Black light to detect and evaluate flaws, their nature, size, scope, and exact location.
If items are repairable, records test results, and marks defect areas and dimensions.
Initiates WCDs that specify the needed repairs.
Re-inspects all repairs performed on each component upon their return to the shop.
Uses and maintains tools.
Maintains bench stock levels of parts, materials, tools, and equipment at prescribed levels.
Uses tools and equipment associated with testing being conducted in the shop, as well as hand and power tools to do the work.
Utilizes safety practices and procedures following established safety rules and regulations to maintain a safe and clean work environment.
Uses and assures proper fit of required Personal Protective Equipment and clothing.
Follows federal and state rules when storing, using, handling, labeling, and disposing of hazardous materials and waste in accordance with environmental standards.
Performs clean-up duties, such as cleaning equipment, sweeping, straightening, and lining up tools and other property in the assigned area.
Maintains records and documents actions.
Manually documents actions taken or enters information into an automated system.
Obtains required coordination and signatures.
Requirements Conditions of Employment Qualifications Military Grades:
E-3 through E-5 GENERAL EXPERIENCE:
Experience or training which demonstrates the ability to set up and operate test equipment, use test apparatus to apply tests to material or products, record readings, observe and record established reactions, and classify according to defined categories SPECIALIZED EXPERIENCE:
Experience or training in using ultrasonic and/or eddy current inspection techniques to observe, measure, and detect discontinuities and flaws.
Experience classifying test results, identifying material deficiencies and recommending courses of action for items of equipment.
Experience recommending engine components to be inspected and forwarding results to the appropriate authority.
Experience performing scheduled inspections of testing equipment ensuring compliance with established technical regulations and procedures.
Education There is no substitution of education for specialized experience for this position.
Additional Information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System :
Selective Service System (sss.gov)).
This position may be eligible for Union Membership.

Read the full job description and apply online on the recuiter's web-site

Related Job Postings

Travel Nurse RN - NICU - Neonatal Intensive Care 2,673 per week

MedPro Healthcare Staffing

US - OK - OK - Oklahoma City
January 30, 2025

MedPro Healthcare Staffing is seeking a travel nurse RN NICU - Neonatal Intensive Care for a travel nursing job in Oklahoma City, Oklahoma. & Requirements • Specialty: NICU - Neonatal Intensive Care • Discipline: RN • Start Date: 02/17/2025 • Duration: 13 weeks • 36 hours per week • Shift: 12 hours,...

Find Jobs Hiring Now Near You!

Get Jobilize Job Search Mobile App Now