<< Chapter < Page Chapter >> Page >

In order to study the statistical fluctuations introduced by the discreteness of charge and matter it is necessary to perform 3D simulations of very large ensembles of hundreds of thousands of devices, rather than a single representative device. Given the increasing number of transistors in modern chips, simulation of very large statistical samples of devices is required to allow statistically rare devices with potentially fatal effects on circuit performance and functionality to be examined. This requires access to significant distributed high performance computing resources, including the UK e-Science National Grid Service , ScotGrid and a wide variety of other resources including Condor pools and campus clusters across partner sites. However, this is not simply another large scale simulation problem, since the commercially sensitive nature of the information and stringent IP protection requirements necessitate fine grained security on access to, and usage of, licensed software; protection of the intellectual property associated with circuit and device designs, data and simulations belonging to industrial partners and key stakeholders.

To this end, the project has developed an infrastructure capable of providing comprehensive security. This includes exploitation of Kerberos for secure global file based access through the Andrews File System; authorization technologies such as PERMIS for definition and enforcement of access policies using centralized attribute authorities such as the Virtual Organisation Membership Service (VOMS), and simple user-oriented access to a project portal through the Internet2 Shibboleth technology using the UK Access Management Federation. Furthermore, the project has identified that a key challenge is in data annotation and management. The simulations that are undertaken can generate large quantities of data and meta-data and the electronics domain unlike other domains does not have agreed standards on data format, rather, the data formats tend to be driven by commercial tool providers.

Total CPU time per VO between 16.11.2006 and 19.3.2009
Total number of submitted jobs per VO between 16.11.2006 and 19.3.2009
nanoCMOS Resource Usage on ScotGrid

Traditionally, due to the computational complexity of 3D device simulation, studies of variability have been based on small ensembles of devices typically up to 200 devices and simulations on much larger scale have hitherto never been undertaken. Simulations of ensembles of up to 100,000+ devices enabled by the grid technology are shedding new light on the impact of atomic structure variation on the behaviour of devices, especially at the extreme limits of device variability. Furthermore, based on these simulations, we have been able to examine the effect of device variability at a simple circuit level and have simulated over 1 million CMOS inverters using random configurations of devices. Figure 3(a) shows the potential and dopant position of a statistically rare device. Figure 3(b) shows the threshold voltage variation as a function of the number of dopants.

Potential/Dopant Distribution for Statistically Rare Device
Threshold Voltage Variation as Function of the Number of Dopant atoms in the transistor

Summary and further workd

The nanoCMOS project has shown the value of e-Research methods in the field of microprocessor circuit design. Use of distributed high performance computing and other dispersed computing resources has allowed for large scale simulations that assist the CMOS design community in managing device variability. The work on nanoCMOS is still progressing and higher level circuit and system design tools are being incorporated into the e-Infrastructure. The systems are being extended in numerous other ways including seamless access to multiple-HPC facilities depending upon user privileges. Optimisation of job submission and management based upon data distribution and security constraints is another area that is currently being investigated. More information on the nanoCMOS project is available at www.nanocmos.ac.uk , or through contacting Prof. Asenov (a.asenov@elec.gla.ac.uk - science related questions) or Prof. Sinnott (r.sinnott@nesc.gla.ac.uk - e-Infrastructure related questions).

Acknowledgements

This work was funded by a grant from the UK Engineering and Physical Sciences Research Council. We gratefully acknowledge their support.

References

Sinnott, R.O. et al. (2006). Meeting the Design Challenges of nanoCMOS Electronics: An Introduction to an EPSRC Pilot Project. UK e-Science All Hands Meeting , Nottingham UK, September.

Reid, D. et al. (2008). Prediction of Random Dopant Induced Threshold Voltage Fluctuations in NanoCMOS Transistors International Conference on Simulation of Semiconductor Processes and Devices , Sept.

Questions & Answers

if three forces F1.f2 .f3 act at a point on a Cartesian plane in the daigram .....so if the question says write down the x and y components ..... I really don't understand
Syamthanda Reply
hey , can you please explain oxidation reaction & redox ?
Boitumelo Reply
hey , can you please explain oxidation reaction and redox ?
Boitumelo
for grade 12 or grade 11?
Sibulele
the value of V1 and V2
Tumelo Reply
advantages of electrons in a circuit
Rethabile Reply
we're do you find electromagnetism past papers
Ntombifuthi
what a normal force
Tholulwazi Reply
it is the force or component of the force that the surface exert on an object incontact with it and which acts perpendicular to the surface
Sihle
what is physics?
Petrus Reply
what is the half reaction of Potassium and chlorine
Anna Reply
how to calculate coefficient of static friction
Lisa Reply
how to calculate static friction
Lisa
How to calculate a current
Tumelo
how to calculate the magnitude of horizontal component of the applied force
Mogano
How to calculate force
Monambi
a structure of a thermocouple used to measure inner temperature
Anna Reply
a fixed gas of a mass is held at standard pressure temperature of 15 degrees Celsius .Calculate the temperature of the gas in Celsius if the pressure is changed to 2×10 to the power 4
Amahle Reply
How is energy being used in bonding?
Raymond Reply
what is acceleration
Syamthanda Reply
a rate of change in velocity of an object whith respect to time
Khuthadzo
how can we find the moment of torque of a circular object
Kidist
Acceleration is a rate of change in velocity.
Justice
t =r×f
Khuthadzo
how to calculate tension by substitution
Precious Reply
hi
Shongi
hi
Leago
use fnet method. how many obects are being calculated ?
Khuthadzo
khuthadzo hii
Hulisani
how to calculate acceleration and tension force
Lungile Reply
you use Fnet equals ma , newtoms second law formula
Masego
please help me with vectors in two dimensions
Mulaudzi Reply
how to calculate normal force
Mulaudzi
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Research in a connected world. OpenStax CNX. Nov 22, 2009 Download for free at http://cnx.org/content/col10677/1.12
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Research in a connected world' conversation and receive update notifications?

Ask