<< Chapter < Page Chapter >> Page >
Trumpet and cornet are closely-related high-pitched brass aerophones commonly found in bands and orchestras.

Introduction

The trumpet is the smallest, highest-sounding instrument in the brass section of the Western orchestra . It is a cylindrical aerophone with a direct, brassy timbre . The cornet is very similar to the trumpet, but has a more conical bore, giving it a slightly gentler, mellower sound. Both trumpets and cornets are common in bands and wind ensembles of all kinds (jazz, classical, pop, military, instructional, etc.). In some groups, they are treated as interchangeable instruments; in other groups, trumpets and cornets have distinct and separate parts.

B flat trumpet

The instruments

Both instruments are made of metal tubing (usually brass, but sometimes a silver alloy) with a detachable mouthpiece at one end and a flaring bell at the other end. Three valves are used to open extra sections of tubing, making the instrument slightly longer, and allowing it to get a different set of notes. (See Harmonic Series for more information on how this works.) The trumpet has a narrower, more cylindrical bore ; the cornet has more gradually flared, conical bore . Also, the way a trumpet is wrapped (that is, the way the tubing is bent and arranged) usually gives it a longer, thinner profile than a cornet. Either one may be a non-transposing C instrument, or may be a slightly longer B flat transposing instrument .

There is also a smaller D trumpet for playing high parts, and an even smaller B flat piccolo trumpet , pitched an octave above the regular B flat trumpet. These are considered specialty instruments, however, and are not nearly as common as the B flat and C instruments.

Another slightly unusual instrument, the flugelhorn , has an even wider, more conical bore than the cornet, and an even gentler, mellower sound. It is mostly heard in jazz.

Written range of the trumpet

A trumpet or cornet in C will sound as written. A trumpet or cornet in B flat will sound one step (whole tone) lower than written.

History

Trumpet-like instruments have been around for at least 4000 years. Early trumpets, like the modern bugle , had no valves. Thus, a single trumpet could only get the notes of a single harmonic series . The higher you go in a harmonic series, the closer together the notes get. This makes it possible to play many more types of melodies (rather than just "bugle call"-type melodies), but also makes playing trickier. Since the notes are closer together, it's much easier to hit the wrong note! So trumpet players specialized: principal players played in the lower register, and clarino players played in the high register.

In the fifteenth century, there were trumpet-player's guilds, which registered clarino and principal trumpet players and which, like other guilds of the time, ensured that only their members would be allowed to do certain types of work (in this case, playing at feasts, processions, and other official musical events).

As late as the Baroque period, composers such as Bach were still specifying some parts for clarino trumpet. But after the Baroque, the clarino tradition vanished so completely, that modern scholars have been unable to discover exactly what type of instrument Baroque clarino parts were played on.

Questions & Answers

A golfer on a fairway is 70 m away from the green, which sits below the level of the fairway by 20 m. If the golfer hits the ball at an angle of 40° with an initial speed of 20 m/s, how close to the green does she come?
Aislinn Reply
cm
tijani
what is titration
John Reply
what is physics
Siyaka Reply
A mouse of mass 200 g falls 100 m down a vertical mine shaft and lands at the bottom with a speed of 8.0 m/s. During its fall, how much work is done on the mouse by air resistance
Jude Reply
Can you compute that for me. Ty
Jude
what is the dimension formula of energy?
David Reply
what is viscosity?
David
what is inorganic
emma Reply
what is chemistry
Youesf Reply
what is inorganic
emma
Chemistry is a branch of science that deals with the study of matter,it composition,it structure and the changes it undergoes
Adjei
please, I'm a physics student and I need help in physics
Adjanou
chemistry could also be understood like the sexual attraction/repulsion of the male and female elements. the reaction varies depending on the energy differences of each given gender. + masculine -female.
Pedro
A ball is thrown straight up.it passes a 2.0m high window 7.50 m off the ground on it path up and takes 1.30 s to go past the window.what was the ball initial velocity
Krampah Reply
2. A sled plus passenger with total mass 50 kg is pulled 20 m across the snow (0.20) at constant velocity by a force directed 25° above the horizontal. Calculate (a) the work of the applied force, (b) the work of friction, and (c) the total work.
Sahid Reply
you have been hired as an espert witness in a court case involving an automobile accident. the accident involved car A of mass 1500kg which crashed into stationary car B of mass 1100kg. the driver of car A applied his brakes 15 m before he skidded and crashed into car B. after the collision, car A s
Samuel Reply
can someone explain to me, an ignorant high school student, why the trend of the graph doesn't follow the fact that the higher frequency a sound wave is, the more power it is, hence, making me think the phons output would follow this general trend?
Joseph Reply
Nevermind i just realied that the graph is the phons output for a person with normal hearing and not just the phons output of the sound waves power, I should read the entire thing next time
Joseph
Follow up question, does anyone know where I can find a graph that accuretly depicts the actual relative "power" output of sound over its frequency instead of just humans hearing
Joseph
"Generation of electrical energy from sound energy | IEEE Conference Publication | IEEE Xplore" ***ieeexplore.ieee.org/document/7150687?reload=true
Ryan
what's motion
Maurice Reply
what are the types of wave
Maurice
answer
Magreth
progressive wave
Magreth
hello friend how are you
Muhammad Reply
fine, how about you?
Mohammed
hi
Mujahid
A string is 3.00 m long with a mass of 5.00 g. The string is held taut with a tension of 500.00 N applied to the string. A pulse is sent down the string. How long does it take the pulse to travel the 3.00 m of the string?
yasuo Reply
Who can show me the full solution in this problem?
Reofrir Reply
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, A parent's guide to band. OpenStax CNX. Jun 25, 2007 Download for free at http://cnx.org/content/col10428/1.1
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'A parent's guide to band' conversation and receive update notifications?

Ask