3.5 Heat capacities of an ideal gas  (Page 19/3)

We learned about specific heat and molar heat capacity in Temperature and Heat ; however, we have not considered a process in which heat is added. We do that in this section. First, we examine a process where the system has a constant volume, then contrast it with a system at constant pressure and show how their specific heats are related.

Let’s start with looking at [link] , which shows two vessels A and B , each containing 1 mol of the same type of ideal gas at a temperature T and a volume V . The only difference between the two vessels is that the piston at the top of A is fixed, whereas the one at the top of B is free to move against a constant external pressure p . We now consider what happens when the temperature of the gas in each vessel is slowly increased to $T+dT$ with the addition of heat.

Since the piston of vessel A is fixed, the volume of the enclosed gas does not change. Consequently, the gas does no work, and we have from the first law

We represent the fact that the heat is exchanged at constant volume by writing

where $C_V$ is the molar heat capacity at constant volume    of the gas. In addition, since $d{E}_{\text{int}}=dQ$ for this particular process,

We obtained this equation assuming the volume of the gas was fixed. However, internal energy is a state function that depends on only the temperature of an ideal gas. Therefore, $d{E}_{\text{int}}=C_{V}dT$ gives the change in internal energy of an ideal gas for any process involving a temperature change dT .

When the gas in vessel B is heated, it expands against the movable piston and does work $dW=pdV.$ In this case, the heat is added at constant pressure, and we write

where $C_p$ is the molar heat capacity at constant pressure    of the gas. Furthermore, since the ideal gas expands against a constant pressure,

becomes

Finally, inserting the expressions for dQ and pdV into the first law, we obtain

We have found $d{E}_{\text{int}}$ for both an isochoric and an isobaric process. Because the internal energy of an ideal gas depends only on the temperature, $d{E}_{\text{int}}$ must be the same for both processes. Thus,

and

The derivation of [link] was based only on the ideal gas law. Consequently, this relationship is approximately valid for all dilute gases, whether monatomic like He, diatomic like ${\text{O}}_2,$ or polyatomic like ${\text{CO}}_2{\text{or NH}}_3\text{.}$

In the preceding chapter, we found the molar heat capacity of an ideal gas under constant volume to be

where d is the number of degrees of freedom of a molecule in the system. [link] shows the molar heat capacities of some dilute ideal gases at room temperature. The heat capacities of real gases are somewhat higher than those predicted by the expressions of $C_V$ and $C_p$ given in [link] . This indicates that vibrational motion in polyatomic molecules is significant, even at room temperature. Nevertheless, the difference in the molar heat capacities, $C_p-C_V,$ is very close to R , even for the polyatomic gases.

Summary

• For an ideal gas, the molar capacity at constant pressure $C_p$ is given by $C_p=C_V+R=dR\text{/}2+R$ , where d is the number of degrees of freedom of each molecule/entity in the system.
• A real gas has a specific heat close to but a little bit higher than that of the corresponding ideal gas with $C_p\simeq C_V+R.$

Conceptual questions

Problems