9.6 Center of mass  (Page 9/13)

Suppose a fireworks shell explodes, breaking into three large pieces for which air resistance is negligible. How does the explosion affect the motion of the center of mass? How would it be affected if the pieces experienced significantly more air resistance than the intact shell?

Three point masses are placed at the corners of a triangle as shown in the figure below.

Find the center of mass of the three-mass system.

Two particles of masses $m_1$ and $m_2$ separated by a horizontal distance D are released from the same height h at the same time. Find the vertical position of the center of mass of these two particles at a time before the two particles strike the ground. Assume no air resistance.

Two particles of masses $m_1$ and $m_2$ separated by a horizontal distance D are let go from the same height h at different times. Particle 1 starts at $t=0$ , and particle 2 is let go at $t=T$ . Find the vertical position of the center of mass at a time before the first particle strikes the ground. Assume no air resistance.

Two particles of masses $m_1$ and $m_2$ move uniformly in different circles of radii $R_1$ and $R_2$ about origin in the x , y -plane. The x - and y -coordinates of the center of mass and that of particle 1 are given as follows (where length is in meters and t in seconds):
$x_1(t)=4\text{cos}(2t),y_1(t)=4\text{sin}(2t)$

and:
$x_{\text{CM}}(t)=3\text{cos}(2t),y_{\text{CM}}(t)=3\text{sin}(2t).$

1. Find the radius of the circle in which particle 1 moves.
2. Find the x - and y -coordinates of particle 2 and the radius of the circle this particle moves.

Two particles of masses $m_1$ and $m_2$ move uniformly in different circles of radii $R_1$ and $R_2$ about the origin in the x , y -plane. The coordinates of the two particles in meters are given as follows ( $z=0$ for both). Here t is in seconds:
$\begin{array}{ccc}\hfill x_1(t)& =\hfill & 4\text{cos}(2t)\hfill \\ \hfill y_1(t)& =\hfill & 4\text{sin}(2t)\hfill \\ \hfill x_2(t)& =\hfill & 2\text{cos}\left(3t-\frac{\pi }{2}\right)\hfill \\ \hfill y_2(t)& =\hfill & 2\text{sin}\left(3t-\frac{\pi }{2}\right)\hfill \end{array}$

1. Find the radii of the circles of motion of both particles.
2. Find the x - and y -coordinates of the center of mass.
3. Decide if the center of mass moves in a circle by plotting its trajectory.

Find the center of mass of a one-meter long rod, made of 50 cm of iron (density $8\frac{\text{g}}{{\text{cm}}^3}$ ) and 50 cm of aluminum (density $2.7\frac{\text{g}}{{\text{cm}}^3}$ ).

Find the center of mass of a rod of length L whose mass density changes from one end to the other quadratically. That is, if the rod is laid out along the x -axis with one end at the origin and the other end at $x=L$ , the density is given by $\rho (x)={\rho }_0+\left({\rho }_1-{\rho }_0\right){\left(\frac{x}{L}\right)}^2$ , where ${\rho }_0$ and ${\rho }_1$ are constant values.

Find the center of mass of a rectangular block of length a and width b that has a nonuniform density such that when the rectangle is placed in the x , y -plane with one corner at the origin and the block placed in the first quadrant with the two edges along the x - and y -axes, the density is given by $\rho (x,y)={\rho }_{0}x$ , where ${\rho }_0$ is a constant.

Find the center of mass of a rectangular material of length a and width b made up of a material of nonuniform density. The density is such that when the rectangle is placed in the xy -plane, the density is given by $\rho (x,y)={\rho }_{0}xy$ .

A cube of side a is cut out of another cube of side b as shown in the figure below.

Find the location of the center of mass of the structure. ( Hint: Think of the missing part as a negative mass overlapping a positive mass.)

Find the center of mass of cone of uniform density that has a radius R at the base, height h , and mass M . Let the origin be at the center of the base of the cone and have + z going through the cone vertex.

Find the center of mass of a thin wire of mass m and length L bent in a semicircular shape. Let the origin be at the center of the semicircle and have the wire arc from the + x axis, cross the + y axis, and terminate at the − x axis.

Find the center of mass of a uniform thin semicircular plate of radius R . Let the origin be at the center of the semicircle, the plate arc from the + x axis to the −x axis, and the z axis be perpendicular to the plate.

Find the center of mass of a sphere of mass M and radius R and a cylinder of mass m , radius r , and height h arranged as shown below.

Express your answers in a coordinate system that has the origin at the center of the cylinder.