<< Chapter < Page Chapter >> Page >
This figure shows a molecular model of a probe that is dragged over the surface of a substrate. The substrate is represented by a rectangular grid of small spheres, each sphere representing an atom. The probe, made up of a different grid of small spheres, is in the form of an inverted pyramid with a flattened peak and horizontal layers of atoms. The pyramid is somewhat distorted because of friction. The atomic and molecular interactions occur at the interface between the probe and the substrate. The friction, f, is parallel to the surface and in the opposite direction of the motion of the probe.
The tip of a probe is deformed sideways by frictional force as the probe is dragged across a surface. Measurements of how the force varies for different materials are yielding fundamental insights into the atomic nature of friction.

Describe a model for friction on a molecular level. Describe matter in terms of molecular motion. The description should include diagrams to support the description; how the temperature affects the image; what are the differences and similarities between solid, liquid, and gas particle motion; and how the size and speed of gas molecules relate to everyday objects.

Sliding blocks

The two blocks of [link] are attached to each other by a massless string that is wrapped around a frictionless pulley. When the bottom 4.00-kg block is pulled to the left by the constant force P , the top 2.00-kg block slides across it to the right. Find the magnitude of the force necessary to move the blocks at constant speed. Assume that the coefficient of kinetic friction between all surfaces is 0.400.

Figure (a) shows an illustration of a 4.0 kilogram block on a horizontal surface and a 2.0 kilogram block resting on top of it. A pulley is connected horizontally to a wall to the right of the blocks. The blocks are connected by a string that passes from one block, over the pulley, and to the other block so that the string is horizontal and to the right of each block. A force P pulls the lower block to the left. An x y coordinate system is shown, with positive x to the right and positive y up. Figure (b) shows the free body diagrams of the blocks. The upper block has forces mu times vector N sub 1 to the left, vector T to the right, 19.6 N vertically down, and vector N sub 1 up.  The lower block has forces mu times vector N sub 1 to the right, mu times vector N sub 2 to the right, Vector P to the left, vector T sub i to the right, Vector N sub 1 vertically down, weight w down, and vector N sub 2 up.
(a) Each block moves at constant velocity. (b) Free-body diagrams for the blocks.

Strategy

We analyze the motions of the two blocks separately. The top block is subjected to a contact force exerted by the bottom block. The components of this force are the normal force N 1 and the frictional force −0.400 N 1 . Other forces on the top block are the tension T i in the string and the weight of the top block itself, 19.6 N. The bottom block is subjected to contact forces due to the top block and due to the floor. The first contact force has components N 1 and 0.400 N 1 , which are simply reaction forces to the contact forces that the bottom block exerts on the top block. The components of the contact force of the floor are N 2 and 0.400 N 2 . Other forces on this block are P , the tension T i , and the weight –39.2 N.

Solution

Since the top block is moving horizontally to the right at constant velocity, its acceleration is zero in both the horizontal and the vertical directions. From Newton’s second law,

F x = m 1 a x F y = m 1 a y T 0.400 N 1 = 0 N 1 19.6 N = 0 .

Solving for the two unknowns, we obtain N 1 = 19.6 N and T = 0.40 N 1 = 7.84 N . The bottom block is also not accelerating, so the application of Newton’s second law to this block gives

F x = m 2 a x F y = m 2 a y T P + 0.400 N 1 + 0.400 N 2 = 0 N 2 39.2 N N 1 = 0 .

The values of N 1 and T were found with the first set of equations. When these values are substituted into the second set of equations, we can determine N 2 and P . They are

N 2 = 58.8 N and P = 39.2 N .

Significance

Understanding what direction in which to draw the friction force is often troublesome. Notice that each friction force labeled in [link] acts in the direction opposite the motion of its corresponding block.

A crate on an accelerating truck

A 50.0-kg crate rests on the bed of a truck as shown in [link] . The coefficients of friction between the surfaces are μ k = 0.300 and μ s = 0.400 . Find the frictional force on the crate when the truck is accelerating forward relative to the ground at (a) 2.00 m/s 2 , and (b) 5.00 m/s 2 .

Figure (a) shows an illustration of a 50 kilogram crate on the bed of a truck. A horizontal arrow indicates an acceleration, a, to the right. An x y coordinate system is shown, with positive x to the right and positive y up. Figure (b) shows the free body diagram of the crate. The forces are 490 Newtons vertically down, vector N vertically up, and vector f horizontally to the right.
(a) A crate rests on the bed of the truck that is accelerating forward. (b) The free-body diagram of the crate.

Strategy

The forces on the crate are its weight and the normal and frictional forces due to contact with the truck bed. We start by assuming that the crate is not slipping. In this case, the static frictional force f s acts on the crate. Furthermore, the accelerations of the crate and the truck are equal.

Solution

  1. Application of Newton’s second law to the crate, using the reference frame attached to the ground, yields
    F x = m a x F y = m a y f s = ( 50.0 kg ) ( 2.00 m/s 2 ) N 4.90 × 10 2 N = ( 50.0 kg ) ( 0 ) = 1.00 × 10 2 N N = 4.90 × 10 2 N .

    We can now check the validity of our no-slip assumption. The maximum value of the force of static friction is
    μ s N = ( 0.400 ) ( 4.90 × 10 2 N ) = 196 N,

    whereas the actual force of static friction that acts when the truck accelerates forward at 2.00 m/s 2 is only 1.00 × 10 2 N . Thus, the assumption of no slipping is valid.
  2. If the crate is to move with the truck when it accelerates at 5.0 m/s 2 , the force of static friction must be
    f s = m a x = ( 50.0 kg ) ( 5.00 m/s 2 ) = 250 N .

    Since this exceeds the maximum of 196 N, the crate must slip. The frictional force is therefore kinetic and is
    f k = μ k N = ( 0.300 ) ( 4.90 × 10 2 N ) = 147 N .

    The horizontal acceleration of the crate relative to the ground is now found from
    F x = m a x 147 N = ( 50.0 kg ) a x , so a x = 2.94 m/s 2 .

Significance

Relative to the ground, the truck is accelerating forward at 5.0 m/s 2 and the crate is accelerating forward at 2.94 m/s 2 . Hence the crate is sliding backward relative to the bed of the truck with an acceleration 2.94 m/s 2 5.00 m/s 2 = −2.06 m/s 2 .

Got questions? Get instant answers now!
Practice Key Terms 3

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, University physics volume 1. OpenStax CNX. Sep 19, 2016 Download for free at http://cnx.org/content/col12031/1.5
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'University physics volume 1' conversation and receive update notifications?

Ask