14.2 Measuring pressure  (Page 3/5)

Weather forecasters closely monitor changes in atmospheric pressure (often reported as barometric pressure), as rising mercury typically signals improving weather and falling mercury indicates deteriorating weather. The barometer can also be used as an altimeter, since average atmospheric pressure varies with altitude. Mercury barometers and manometers are so common that units of mm Hg are often quoted for atmospheric pressure and blood pressures.

Fluid heights in an open u-tube

A U-tube with both ends open is filled with a liquid of density ${\rho }_1$ to a height h on both sides ( [link] ). A liquid of density ${\rho }_2<{\rho }_1$ is poured into one side and Liquid 2 settles on top of Liquid 1. The heights on the two sides are different. The height to the top of Liquid 2 from the interface is $h_2$ and the height to the top of Liquid 1 from the level of the interface is $h_1$ . Derive a formula for the height difference.

Strategy

The pressure at points at the same height on the two sides of a U-tube must be the same as long as the two points are in the same liquid. Therefore, we consider two points at the same level in the two arms of the tube: One point is the interface on the side of the Liquid 2 and the other is a point in the arm with Liquid 1 that is at the same level as the interface in the other arm. The pressure at each point is due to atmospheric pressure plus the weight of the liquid above it.

$\begin{array}{c}\text{Pressure on the side with Liquid 1}=p_0+{\rho }_{1}g{h}_1\hfill \\ \text{Pressure on the side with Liquid 2}=p_0+{\rho }_{2}g{h}_2\hfill \end{array}$

Solution

Since the two points are in Liquid 1 and are at the same height, the pressure at the two points must be the same. Therefore, we have

$p_0+{\rho }_{1}g{h}_1=p_0+{\rho }_{2}g{h}_2.$

Hence,

${\rho }_1{h}_1={\rho }_2{h}_2.$

This means that the difference in heights on the two sides of the U-tube is

$h_2-h_1=\left(1-\frac{p_1}{p_2}\right)h_2.$

The result makes sense if we set $p_2=p_1,$ which gives $h_2=h_1.$ If the two sides have the same density, they have the same height.

Got questions? Get instant answers now!

Units of pressure

As stated earlier, the SI unit for pressure is the pascal (Pa), where

In addition to the pascal, many other units for pressure are in common use ( [link] ). In meteorology, atmospheric pressure is often described in the unit of millibars (mb), where

The millibar is a convenient unit for meteorologists because the average atmospheric pressure at sea level on Earth is $1.013\times {10}^5\text{Pa}=1013\text{mb}=1\text{atm}$ . Using the equations derived when considering pressure at a depth in a fluid, pressure can also be measured as millimeters or inches of mercury. The pressure at the bottom of a 760-mm column of mercury at $0\text{°C}$ in a container where the top part is evacuated is equal to the atmospheric pressure. Thus, 760 mm Hg is also used in place of 1 atmosphere of pressure. In vacuum physics labs, scientists often use another unit called the torr, named after Torricelli, who, as we have just seen, invented the mercury manometer for measuring pressure. One torr is equal to a pressure of 1 mm Hg.

Summary

• Gauge pressure is the pressure relative to atmospheric pressure.
• Absolute pressure is the sum of gauge pressure and atmospheric pressure.
• Open-tube manometers have U-shaped tubes and one end is always open. They are used to measure pressure. A mercury barometer is a device that measures atmospheric pressure.
• The SI unit of pressure is the pascal (Pa), but several other units are commonly used.

Conceptual questions

Problems