12.2 Examples of static equilibrium (Page 8/9)

University physics volume 1 Page 8 / 9

We select the pivot at point P (upper hinge, per the free-body diagram) and write the second equilibrium condition for torques in rotation about point P :

pivot at P : τ_{w} + τ_{B x} + τ_{B y} = 0 .

We use the free-body diagram to find all the terms in this equation:

\begin{matrix} τ_{w} & = & d w sin (− β) = − d w sin β = − d w \frac{b / 2}{d} = − w \frac{b}{2} \\ τ_{B x} & = & a B_{x} sin 90 ° = + a B_{x} \\ τ_{B y} & = & a B_{y} sin 180 ° = 0 . \end{matrix}

In evaluating $sin β,$ we use the geometry of the triangle shown in part (a) of the figure. Now we substitute these torques into [link] and compute $B_{x} :$

pivot at P : − w \frac{b}{2} + a B_{x} = 0 \Rightarrow B_{x} = w \frac{b}{2 a} = (400.0 N) \frac{1}{2 \cdot 2} = 100.0 N.

Therefore the magnitudes of the horizontal component forces are $A_{x} = B_{x} = 100.0 N .$ The forces on the door are

\begin{matrix} at the upper hinge: {\vec{F}}_{A on door} = −100.0 N \hat{i} + 200.0 N \hat{j} \\ at the lower hinge: {\vec{F}}_{B on door} = + 100.0 N \hat{i} + 200.0 N \hat{j} . \end{matrix}

The forces on the hinges are found from Newton’s third law as

\begin{matrix} on the upper hinge: {\vec{F}}_{door on A} = 100.0 N \hat{i} - 200.0 N \hat{j} \\ on the lower hinge: {\vec{F}}_{door on B} = −100.0 N \hat{i} - 200.0 N \hat{j} . \end{matrix}

Significance

Note that if the problem were formulated without the assumption of the weight being equally distributed between the two hinges, we wouldn’t be able to solve it because the number of the unknowns would be greater than the number of equations expressing equilibrium conditions.

Check Your Understanding Solve the problem in [link] by taking the pivot position at the center of mass.

${\vec{F}}_{door on A} = 100.0 N \hat{i} - 200.0 N \hat{j}; {\vec{F}}_{door on B} = −100.0 N \hat{i} - 200.0 N \hat{j}$

Got questions? Get instant answers now!

Check Your Understanding A 50-kg person stands 1.5 m away from one end of a uniform 6.0-m-long scaffold of mass 70.0 kg. Find the tensions in the two vertical ropes supporting the scaffold.

Figure is a schematic drawing of a woman standing 1.5 m away from one end and 4.5 m away from another end of a scaffold.

711.0 N; 466.0 N

Got questions? Get instant answers now!

Check Your Understanding A 400.0-N sign hangs from the end of a uniform strut. The strut is 4.0 m long and weighs 600.0 N. The strut is supported by a hinge at the wall and by a cable whose other end is tied to the wall at a point 3.0 m above the left end of the strut. Find the tension in the supporting cable and the force of the hinge on the strut.

Figure is a schematic drawing of a sign which hangs from the end of a uniform strut. The strut is 4.0 m long and is supported by a 5.0 m long cable tied to the wall at a point 3.0 m above the left end of the strut.

1167 N; 980 N directed upward at $18 °$ above the horizontal

Got questions? Get instant answers now!

Summary

A variety of engineering problems can be solved by applying equilibrium conditions for rigid bodies.
In applications, identify all forces that act on a rigid body and note their lever arms in rotation about a chosen rotation axis. Construct a free-body diagram for the body. Net external forces and torques can be clearly identified from a correctly constructed free-body diagram. In this way, you can set up the first equilibrium condition for forces and the second equilibrium condition for torques.
In setting up equilibrium conditions, we are free to adopt any inertial frame of reference and any position of the pivot point. All choices lead to one answer. However, some choices can make the process of finding the solution unduly complicated. We reach the same answer no matter what choices we make. The only way to master this skill is to practice.

Conceptual questions

Is it possible to rest a ladder against a rough wall when the floor is frictionless?

Got questions? Get instant answers now!

Show how a spring scale and a simple fulcrum can be used to weigh an object whose weight is larger than the maximum reading on the scale.

(Proof)

Got questions? Get instant answers now!

<< Chapter < Page Page > Chapter >>

Read also:

Get Jobilize Job Search Mobile App in your pocket Now!

100% Free Mobile Applications
Receive real-time job alerts and never miss the right job again

Source: OpenStax, University physics volume 1. OpenStax CNX. Sep 19, 2016 Download for free at http://cnx.org/content/col12031/1.5

Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'University physics volume 1' conversation and receive update notifications?

Ask

	27 AP 27 Reproductive System MCQ By OpenStax Start Quiz
	1 AP 01 Human Body Anatomy Physiology MCQ By OpenStax Start Quiz
	36 Biology 36 Sensory Systems MCQ By OpenStax Start Quiz
	22 AP 22 Respiratory System MCQ By OpenStax Start Quiz
	21 Sociology 21 Social Movements Social Change MCQ By OpenStax Start Quiz
	10 AP 10 Muscle Tissue MCQ Quiz By OpenStax Start Quiz
	Anthropology Biology Culture By Richley Crapo Start Assignment
	3 Neuroanatomy 03 Ventricular System By Stephen Voron Start Quiz
	17 Biology 17 Biotechnology and Genomics MCQ By OpenStax Start Quiz
©flickr: quinn	Neuroanatomy By George Turner Start Quiz