1. Home
  2. College physics
  3. Electromagnetic induction, ac
  4. Rl circuits

23.10 Rl circuits  (Page 2/3)

<< Chapter < Page
  College physics     Page 2 / 3
Chapter >> Page >
I = I 0 e − t / τ     (turning off). size 12{I=I rSub { size 8{0} } e rSup { size 8{ - t/τ} } } {}

(See [link] (c).) In the first period of time τ = L / R size 12{τ=L/R} {} after the switch is closed, the current falls to 0.368 of its initial value, since I = I 0 e − 1 = 0 . 368 I 0 size 12{I=I rSub { size 8{0} } e rSup { size 8{ - 1} } =0 "." "368"I rSub { size 8{0} } } {} . In each successive time τ size 12{τ} {} , the current falls to 0.368 of the preceding value, and in a few multiples of τ size 12{τ} {} , the current becomes very close to zero, as seen in the graph in [link] (c).

Calculating characteristic time and current in an RL Circuit

(a) What is the characteristic time constant for a 7.50 mH inductor in series with a 3.00 Ω resistor? (b) Find the current 5.00 ms after the switch is moved to position 2 to disconnect the battery, if it is initially 10.0 A.

Strategy for (a)

The time constant for an RL circuit is defined by τ = L / R size 12{τ=L/R} {} .

Solution for (a)

Entering known values into the expression for τ size 12{τ} {} given in τ = L / R size 12{τ=L/R} {} yields

τ = L R = 7.50 mH 3.00 Ω = 2.50 ms. size 12{τ= { {L} over {R} } = { {7 "." "50"" mH"} over {3 "." "00 " %OMEGA } } =2 "." "50"" ms"} {}

Discussion for (a)

This is a small but definitely finite time. The coil will be very close to its full current in about ten time constants, or about 25 ms.

Strategy for (b)

We can find the current by using I = I 0 e − t / τ size 12{I=I rSub { size 8{0} } e rSup { size 8{ - t/τ} } } {} , or by considering the decline in steps. Since the time is twice the characteristic time, we consider the process in steps.

Solution for (b)

In the first 2.50 ms, the current declines to 0.368 of its initial value, which is

I = 0 . 368 I 0 = ( 0 . 368 ) ( 10.0 A ) = 3 . 68 A at  t = 2 . 50  ms.

After another 2.50 ms, or a total of 5.00 ms, the current declines to 0.368 of the value just found. That is,

I ′ = 0 . 368 I = ( 0 . 368 ) ( 3.68 A ) = 1 . 35  A at  t = 5 . 00  ms. alignl { stack { size 12{ { {I}} sup { ' }=0 "." "368"I= \( 0 "." "368" \) \( 3 "." "68"" A" \) } {} #size 12{" "=1 "." "35"" A at "t=5 "." "00"" ms"} {} } } {}

Discussion for (b)

After another 5.00 ms has passed, the current will be 0.183 A (see [link] ); so, although it does die out, the current certainly does not go to zero instantaneously.

Got questions? Get instant answers now!

In summary, when the voltage applied to an inductor is changed, the current also changes, but the change in current lags the change in voltage in an RL circuit . In Reactance, Inductive and Capacitive , we explore how an RL circuit behaves when a sinusoidal AC voltage is applied.

Section summary

  • When a series connection of a resistor and an inductor—an RL circuit—is connected to a voltage source, the time variation of the current is
    I = I 0 ( 1 − e − t / τ )     (turning on). size 12{I=I rSub { size 8{0} } \( 1 - e rSup { size 8{ - t/τ} } \) } {}
    where I 0 = V / R size 12{I rSub { size 8{0} } =V/R} {} is the final current.
  • The characteristic time constant τ size 12{τ} {} is τ = L R size 12{τ= { {L} over {R} } } {} , where L is the inductance and R is the resistance.
  • In the first time constant τ size 12{τ} {} , the current rises from zero to 0 . 632 I 0 size 12{0 "." "632"I rSub { size 8{0} } } {} , and 0.632 of the remainder in every subsequent time interval τ size 12{τ} {} .
  • When the inductor is shorted through a resistor, current decreases as
    I = I 0 e − t / τ     (turning off). size 12{I=I rSub { size 8{0} } e rSup { size 8{ - t/τ} } } {}
    Here I 0 size 12{I rSub { size 8{0} } } {} is the initial current.
  • Current falls to 0 . 368 I 0 size 12{0 "." "368"I rSub { size 8{0} } } {} in the first time interval τ size 12{τ} {} , and 0.368 of the remainder toward zero in each subsequent time τ size 12{τ} {} .

Problem exercises

If you want a characteristic RL time constant of 1.00 s, and you have a 500 Ω resistor, what value of self-inductance is needed?

500 H

Got questions? Get instant answers now!

Your RL circuit has a characteristic time constant of 20.0 ns, and a resistance of 5.00 MΩ . (a) What is the inductance of the circuit? (b) What resistance would give you a 1.00 ns time constant, perhaps needed for quick response in an oscilloscope?

Got questions? Get instant answers now!

A large superconducting magnet, used for magnetic resonance imaging, has a 50.0 H inductance. If you want current through it to be adjustable with a 1.00 s characteristic time constant, what is the minimum resistance of system?

50.0 Ω

Got questions? Get instant answers now!

Verify that after a time of 10.0 ms, the current for the situation considered in [link] will be 0.183 A as stated.

Got questions? Get instant answers now!

Suppose you have a supply of inductors ranging from 1.00 nH to 10.0 H, and resistors ranging from 0.100 Ω to 1.00 MΩ . What is the range of characteristic RL time constants you can produce by connecting a single resistor to a single inductor?

1 . 00 × 10 –18 s size 12{1 "." "00" times "10" rSup { size 8{"-15"} } " s"} {} to 0.100 s

Got questions? Get instant answers now!

(a) What is the characteristic time constant of a 25.0 mH inductor that has a resistance of 4.00 Ω ? (b) If it is connected to a 12.0 V battery, what is the current after 12.5 ms?

Got questions? Get instant answers now!

What percentage of the final current I 0 flows through an inductor L size 12{L} {} in series with a resistor R size 12{R} {} , three time constants after the circuit is completed?

95.0%

Got questions? Get instant answers now!

The 5.00 A current through a 1.50 H inductor is dissipated by a 2.00 Ω resistor in a circuit like that in [link] with the switch in position 2. (a) What is the initial energy in the inductor? (b) How long will it take the current to decline to 5.00% of its initial value? (c) Calculate the average power dissipated, and compare it with the initial power dissipated by the resistor.

Got questions? Get instant answers now!

(a) Use the exact exponential treatment to find how much time is required to bring the current through an 80.0 mH inductor in series with a 15.0 Ω resistor to 99.0% of its final value, starting from zero. (b) Compare your answer to the approximate treatment using integral numbers of τ size 12{τ} {} . (c) Discuss how significant the difference is.

(a) 24.6 ms

(b) 26.7 ms

(c) 9% difference, which is greater than the inherent uncertainty in the given parameters.

Got questions? Get instant answers now!

(a) Using the exact exponential treatment, find the time required for the current through a 2.00 H inductor in series with a 0.500 Ω resistor to be reduced to 0.100% of its original value. (b) Compare your answer to the approximate treatment using integral numbers of τ size 12{τ} {} . (c) Discuss how significant the difference is.

Got questions? Get instant answers now!

Questions & Answers

A golfer on a fairway is 70 m away from the green, which sits below the level of the fairway by 20 m. If the golfer hits the ball at an angle of 40° with an initial speed of 20 m/s, how close to the green does she come?
Aislinn Reply
cm
tijani
what is titration
John Reply
what is physics
Siyaka Reply
A mouse of mass 200 g falls 100 m down a vertical mine shaft and lands at the bottom with a speed of 8.0 m/s. During its fall, how much work is done on the mouse by air resistance
Jude Reply
Can you compute that for me. Ty
Jude
what is the dimension formula of energy?
David Reply
what is viscosity?
David
what is inorganic
emma Reply
what is chemistry
Youesf Reply
what is inorganic
emma
Chemistry is a branch of science that deals with the study of matter,it composition,it structure and the changes it undergoes
Adjei
please, I'm a physics student and I need help in physics
Adjanou
chemistry could also be understood like the sexual attraction/repulsion of the male and female elements. the reaction varies depending on the energy differences of each given gender. + masculine -female.
Pedro
A ball is thrown straight up.it passes a 2.0m high window 7.50 m off the ground on it path up and takes 1.30 s to go past the window.what was the ball initial velocity
Krampah Reply
2. A sled plus passenger with total mass 50 kg is pulled 20 m across the snow (0.20) at constant velocity by a force directed 25° above the horizontal. Calculate (a) the work of the applied force, (b) the work of friction, and (c) the total work.
Sahid Reply
you have been hired as an espert witness in a court case involving an automobile accident. the accident involved car A of mass 1500kg which crashed into stationary car B of mass 1100kg. the driver of car A applied his brakes 15 m before he skidded and crashed into car B. after the collision, car A s
Samuel Reply
can someone explain to me, an ignorant high school student, why the trend of the graph doesn't follow the fact that the higher frequency a sound wave is, the more power it is, hence, making me think the phons output would follow this general trend?
Joseph Reply
Nevermind i just realied that the graph is the phons output for a person with normal hearing and not just the phons output of the sound waves power, I should read the entire thing next time
Joseph
Follow up question, does anyone know where I can find a graph that accuretly depicts the actual relative "power" output of sound over its frequency instead of just humans hearing
Joseph
"Generation of electrical energy from sound energy | IEEE Conference Publication | IEEE Xplore" ***ieeexplore.ieee.org/document/7150687?reload=true
Ryan
what's motion
Maurice Reply
what are the types of wave
Maurice
answer
Magreth
progressive wave
Magreth
hello friend how are you
Muhammad Reply
fine, how about you?
Mohammed
hi
Mujahid
A string is 3.00 m long with a mass of 5.00 g. The string is held taut with a tension of 500.00 N applied to the string. A pulse is sent down the string. How long does it take the pulse to travel the 3.00 m of the string?
yasuo Reply
Who can show me the full solution in this problem?
Reofrir Reply
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply
<< Chapter < Page Page > Chapter >>
Practice Key Terms 1

Read also:

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, College physics. OpenStax CNX. Jul 27, 2015 Download for free at http://legacy.cnx.org/content/col11406/1.9
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'College physics' conversation and receive update notifications?

Ask