Lastly, the heat transfer rate depends on the material properties described by the coefficient of thermal conductivity. All four factors are included in a simple equation that was deduced from and is confirmed by experiments. The
rate of conductive heat transfer through a slab of material, such as the one in
[link] , is given by
where
is the rate of heat transfer in watts or kilocalories per second,
is the
thermal conductivity of the material,
and
are its surface area and thickness, as shown in
[link] , and
is the temperature difference across the slab.
[link] gives representative values of thermal conductivity.
Calculating heat transfer through conduction: conduction rate through an ice box
A Styrofoam ice box has a total area of
and walls with an average thickness of 2.50 cm. The box contains ice, water, and canned beverages at
. The inside of the box is kept cold by melting ice. How much ice melts in one day if the ice box is kept in the trunk of a car at
?
Strategy
This question involves both heat for a phase change (melting of ice) and the transfer of heat by conduction. To find the amount of ice melted, we must find the net heat transferred. This value can be obtained by calculating the rate of heat transfer by conduction and multiplying by time.
Solution
Identify the knowns.
Identify the unknowns. We need to solve for the mass of the ice,
. We will also need to solve for the net heat transferred to melt the ice,
.
Determine which equations to use. The rate of heat transfer by conduction is given by
The heat is used to melt the ice:
Insert the known values:
Multiply the rate of heat transfer by the time (
):
Set this equal to the heat transferred to melt the ice:
. Solve for the mass
:
Discussion
The result of 3.44 kg, or about 7.6 lbs, seems about right, based on experience. You might expect to use about a 4 kg (7–10 lb) bag of ice per day. A little extra ice is required if you add any warm food or beverages.
Inspecting the conductivities in
[link] shows that Styrofoam is a very poor conductor and thus a good insulator. Other good insulators include fiberglass, wool, and goose-down feathers. Like Styrofoam, these all incorporate many small pockets of air, taking advantage of air’s poor thermal conductivity.