<< Chapter < Page Chapter >> Page >
In standard music notation, the duration (time length) of a particular note is defined by how long it lasts compared to a whole note.

The shape of a note

In standard notation, a single musical sound is written as a note . The two most important things a written piece of music needs to tell you about a note are its pitch - how high or low it is - and its duration - how long it lasts.

To find out the pitch of a written note, you look at the clef and the key signature , then see what line or space the note is on. The higher a note sits on the staff , the higher it sounds. To find out the duration of the written note, you look at the tempo and the time signature and then see what the note looks like.

The parts of a note

All of the parts of a written note affect how long it lasts.

The pitch of the note depends only on what line or space the head of the note is on. (Please see pitch , clef and key signature for more information.) If the note does not have a head (see [link] ), that means that it does not have one definite pitch.

Notes without heads

If a note does not have head, it does not have one definite pitch. Such a note may be a pitchless sound, like a drum beat or a hand clap, or it may be an entire chord rather than a single note.

The head of the note may be filled in (black), or not. The note may also have (or not) a stem, one or more flags, beams connecting it to other notes, or one or more dots following the head of the note. All of these things affect how much time the note is given in the music.

A dot that is someplace other than next to the head of the note does not affect the rhythm . Other dots are articulation marks. They may affect the actual length of the note (the amount of time it sounds), but do not affect the amount of time it must be given. (The extra time when the note could be sounding, but isn't, becomes an unwritten rest .) If this is confusing, please see the explanation in articulation .

The length of a note

Most common note lengths

The simplest-looking note, with no stems or flags, is a whole note . All other note lengths are defined by how long they last compared to a whole note. A note that lasts half as long as a whole note is a half note . A note that lasts a quarter as long as a whole note is a quarter note . The pattern continues with eighth notes , sixteenth notes , thirty-second notes , sixty-fourth notes , and so on, each type of note being half the length of the previous type. (There are no such thing as third notes, sixth notes, tenth notes, etc.; see Dots, Ties, and Borrowed Divisions to find out how notes of unusual lengths are written.)

Note lengths work just like fractions in arithmetic: two half notes or four quarter notes last the same amount of time as one whole note. Flags are often replaced by beams that connect the notes into easy-to-read groups.

You may have noticed that some of the eighth notes in [link] don't have flags; instead they have a beam connecting them to another eighth note. If flagged notes are next to each other, their flags can be replaced by beams that connect the notes into easy-to-read groups. The beams may connect notes that are all in the same beat, or, in some vocal music, they may connect notes that are sung on the same text syllable. Each note will have the same number of beams as it would have flags.

Notes with beams

The notes connected with beams are easier to read quickly than the flagged notes. Notice that each note has the same number of beams as it would have flags, even if it is connected to a different type of note. The notes are often (but not always) connected so that each beamed group gets one beat. This makes the notes easier to read quickly.

You may have also noticed that the note lengths sound like fractions in arithmetic. In fact they work very much like fractions: two half notes will be equal to (last as long as) one whole note; four eighth notes will be the same length as one half note; and so on. (For classroom activities relating music to fractions, see Fractions, Multiples, Beats, and Measures .)

Draw the missing notes and fill in the blanks to make each side the same duration (length of time).

Got questions? Get instant answers now!

So how long does each of these notes actually last? That depends on a couple of things. A written note lasts for a certain amount of time measured in beats . To find out exactly how many beats it takes, you must know the time signature . And to find out how long a beat is, you need to know the tempo .

In any particular section of a piece of music, a half note is always twice as long as a quarter note. But how long each note actually lasts depends on the time signature and the tempo.
Got questions? Get instant answers now!

More about stems

Whether a stem points up or down does not affect the note length at all. There are two basic ideas that lead to the rules for stem direction. One is that the music should be as easy as possible to read and understand. The other is that the notes should tend to be "in the staff" as much as reasonably possible.

    Basic stem direction rules

  1. Single Notes - Notes below the middle line of the staff should be stem up. Notes on or above the middle line should be stem down.
  2. Notes sharing a stem (block chords) - Generally, the stem direction will be the direction for the note that is furthest away from the middle line of the staff
  3. Notes sharing a beam - Again, generally you will want to use the stem direction of the note farthest from the center of the staff, to keep the beam near the staff.
  4. Different rhythms being played at the same time by the same player - Clarity requires that you write one rhythm with stems up and the other stems down.
  5. Two parts for different performers written on the same staff - If the parts have the same rhythm, they may be written as block chords. If they do not, the stems for one part (the "high" part or "first" part) will point up and the stems for the other part will point down. This rule is especially important when the two parts cross; otherwise there is no way for the performers to know that the "low" part should be reading the high note at that spot.

Stem direction

Keep stems and beams in or near the staff, but also use stem direction to clarify rhythms and parts when necessary.

Questions & Answers

A golfer on a fairway is 70 m away from the green, which sits below the level of the fairway by 20 m. If the golfer hits the ball at an angle of 40° with an initial speed of 20 m/s, how close to the green does she come?
Aislinn Reply
cm
tijani
what is titration
John Reply
what is physics
Siyaka Reply
A mouse of mass 200 g falls 100 m down a vertical mine shaft and lands at the bottom with a speed of 8.0 m/s. During its fall, how much work is done on the mouse by air resistance
Jude Reply
Can you compute that for me. Ty
Jude
what is the dimension formula of energy?
David Reply
what is viscosity?
David
what is inorganic
emma Reply
what is chemistry
Youesf Reply
what is inorganic
emma
Chemistry is a branch of science that deals with the study of matter,it composition,it structure and the changes it undergoes
Adjei
please, I'm a physics student and I need help in physics
Adjanou
chemistry could also be understood like the sexual attraction/repulsion of the male and female elements. the reaction varies depending on the energy differences of each given gender. + masculine -female.
Pedro
A ball is thrown straight up.it passes a 2.0m high window 7.50 m off the ground on it path up and takes 1.30 s to go past the window.what was the ball initial velocity
Krampah Reply
2. A sled plus passenger with total mass 50 kg is pulled 20 m across the snow (0.20) at constant velocity by a force directed 25° above the horizontal. Calculate (a) the work of the applied force, (b) the work of friction, and (c) the total work.
Sahid Reply
you have been hired as an espert witness in a court case involving an automobile accident. the accident involved car A of mass 1500kg which crashed into stationary car B of mass 1100kg. the driver of car A applied his brakes 15 m before he skidded and crashed into car B. after the collision, car A s
Samuel Reply
can someone explain to me, an ignorant high school student, why the trend of the graph doesn't follow the fact that the higher frequency a sound wave is, the more power it is, hence, making me think the phons output would follow this general trend?
Joseph Reply
Nevermind i just realied that the graph is the phons output for a person with normal hearing and not just the phons output of the sound waves power, I should read the entire thing next time
Joseph
Follow up question, does anyone know where I can find a graph that accuretly depicts the actual relative "power" output of sound over its frequency instead of just humans hearing
Joseph
"Generation of electrical energy from sound energy | IEEE Conference Publication | IEEE Xplore" ***ieeexplore.ieee.org/document/7150687?reload=true
Ryan
what's motion
Maurice Reply
what are the types of wave
Maurice
answer
Magreth
progressive wave
Magreth
hello friend how are you
Muhammad Reply
fine, how about you?
Mohammed
hi
Mujahid
A string is 3.00 m long with a mass of 5.00 g. The string is held taut with a tension of 500.00 N applied to the string. A pulse is sent down the string. How long does it take the pulse to travel the 3.00 m of the string?
yasuo Reply
Who can show me the full solution in this problem?
Reofrir Reply
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Reading music: common notation. OpenStax CNX. Feb 08, 2012 Download for free at http://cnx.org/content/col10209/1.10
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Reading music: common notation' conversation and receive update notifications?

Ask