9.4 Viscosity and laminar flow; poiseuille’s law  (Page 3/12)

If viscosity is zero, the fluid is frictionless and the resistance to flow is also zero. Comparing frictionless flow in a tube to viscous flow, as in [link] , we see that for a viscous fluid, speed is greatest at midstream because of drag at the boundaries. We can see the effect of viscosity in a Bunsen burner flame, even though the viscosity of natural gas is small.

The resistance $R$ to laminar flow of an incompressible fluid having viscosity $\eta$ through a horizontal tube of uniform radius $r$ and length $l$ , such as the one in [link] , is given by

This equation is called Poiseuille’s law for resistance    after the French scientist J. L. Poiseuille (1799–1869), who derived it in an attempt to understand the flow of blood, an often turbulent fluid.

Let us examine Poiseuille’s expression for $R$ to see if it makes good intuitive sense. We see that resistance is directly proportional to both fluid viscosity $\eta$ and the length $l$ of a tube. After all, both of these directly affect the amount of friction encountered—the greater either is, the greater the resistance and the smaller the flow. The radius $r$ of a tube affects the resistance, which again makes sense, because the greater the radius, the greater the flow (all other factors remaining the same). But it is surprising that $r$ is raised to the fourth power in Poiseuille’s law. This exponent means that any change in the radius of a tube has a very large effect on resistance. For example, doubling the radius of a tube decreases resistance by a factor of $2^4=\text{16}$ .

Taken together, $Q=\frac{P_2-P_1}{R}$ and $R=\frac{8\eta l}{\pi r^4}$ give the following expression for flow rate:

This equation describes laminar flow through a tube. It is sometimes called Poiseuille’s law for laminar flow, or simply Poiseuille’s law    .