<< Chapter < Page Chapter >> Page >

Test cases

General paramters

  • L=# of pulses = 4
  • TW = time-bandwidth product = 64
  • p = oversampling factor = 3
  • M = interpulse period = 300
  • n = noise factor = .2 (correspond to SNR of -10dB for received signal)
  • sampfreq = sampling frequency = (20*(10 ^6)) Hz
The sampfreq value of 20*(10^6) Hz was given in"Computer-Based Exerciese for Signal Processing Using MATLAB"by Burrus [ et al.] as an example sampling frequency to use
The paramter"Time Delay"(i.e. TD) is the amount by which the user wants to shift his vector by (i.e. not units of time)
The max range that could be accounted for according to equations based in "Approach for Range" module was 8190 meters (8.2 kilometers)

Test case 1

Simulate a Time Delay of 5 (TD = 5)

Matlab function call

[noisytestecho,noisyshifttestecho,rsigmatchlocs,timedelay,range,h]= burst4 (4,64,3,300,.2,(20*(10 ^6)),5);

Test case 2

Simulate a Time Delay of 30 (TD = 30)

Matlab function call

[noisytestecho,noisyshifttestecho,rsigmatchlocs,timedelay,range,h]= burst4 (4,64,3,300,.2,(20*(10 ^6)),30);

Test case 3

Simulate a Time Delay of 45(TD = 45)

Matlab function call

[noisytestecho,noisyshifttestecho,rsigmatchlocs,timedelay,range,h]= burst4 (4,64,3,300,.2,(20*(10 ^6)),45);

Test case 4

Simulate a Time Delay of 65(TD = 65)

Matlab function call

[noisytestecho,noisyshifttestecho,rsigmatchlocs,timedelay,range,h]= burst4 (4,64,3,300,.2,(20*(10 ^6)),65);

Test case 5

Simulate a Time Delay of 100 (TD = 100)

Matlab function call

[noisytestecho,noisyshifttestecho,rsigmatchlocs,timedelay,range,h]= burst4 (4,64,3,300,.2,(20*(10 ^6)),100);

Test case 6

Simulate a Time Delay of 200 (TD = 200)

Matlab function call

[noisytestecho,noisyshifttestecho,rsigmatchlocs,timedelay,range,h]= burst4 (4,64,3,300,.2,(20*(10 ^6)),200);

Plot examples (for test case 1)

Transmitted chirptrain noise free

Transmitted Chirptrain Noise Free

Shiftedtime-delayedchirptrainwithnoise

ShiftedTime-DelayedChirptrainwithNOISE

Matchedfilteroutputfortransmittedsignal

Matchedfilteroutputfortransmittedsignal

Matchedfilteroutputforrecievedsignal

Matchedfilteroutputforrecievedsignal

Locationofpickedoutpeaksintransmittedsignal

Locationofpickedoutpeaksintransmittedsignal

Locationsofpickedoutpeaksinrecievedsignal

Locationsofpickedoutpeaksinrecievedsignal
The starting value of the past two graphs are at n = 1

Analysis of results

Overall result of test cases given by a graph of the %error of the range approximation compared to" radar "from"Computer-Based Exerciese for Signal Processing Using MATLAB"by Burrus [ et al.] (see pages 328-329 for definition of parameters and function)

%errorinrange2

%errorinrange2

Method of error calculation

The % error was calculated by first taking the returned value for range from our developed program and using that as an input to the" radar "function from Burrus [ et al.]. The resulting waveform generated is then put through the same match filter as our simulated received wave. A comparison of the location of the 1st peaks is then done and the absolute value of the difference is taken. The value is then divided by the difference from the right most edge of" radar "'s first chirp to the end of the signal.

Comment on % error

The % error increased in a direct proportional to however larger we made the new TD value. Thus, if a shift of TD=900 was applied, the % error was 9 times greater than in test case 5 ( TD = 100), it was in fact about 55.89%.

Where to next

Next, look at "RADAR:Velocity Analysis" as next step.

Questions & Answers

A golfer on a fairway is 70 m away from the green, which sits below the level of the fairway by 20 m. If the golfer hits the ball at an angle of 40° with an initial speed of 20 m/s, how close to the green does she come?
Aislinn Reply
cm
tijani
what is titration
John Reply
what is physics
Siyaka Reply
A mouse of mass 200 g falls 100 m down a vertical mine shaft and lands at the bottom with a speed of 8.0 m/s. During its fall, how much work is done on the mouse by air resistance
Jude Reply
Can you compute that for me. Ty
Jude
what is the dimension formula of energy?
David Reply
what is viscosity?
David
what is inorganic
emma Reply
what is chemistry
Youesf Reply
what is inorganic
emma
Chemistry is a branch of science that deals with the study of matter,it composition,it structure and the changes it undergoes
Adjei
please, I'm a physics student and I need help in physics
Adjanou
chemistry could also be understood like the sexual attraction/repulsion of the male and female elements. the reaction varies depending on the energy differences of each given gender. + masculine -female.
Pedro
A ball is thrown straight up.it passes a 2.0m high window 7.50 m off the ground on it path up and takes 1.30 s to go past the window.what was the ball initial velocity
Krampah Reply
2. A sled plus passenger with total mass 50 kg is pulled 20 m across the snow (0.20) at constant velocity by a force directed 25° above the horizontal. Calculate (a) the work of the applied force, (b) the work of friction, and (c) the total work.
Sahid Reply
you have been hired as an espert witness in a court case involving an automobile accident. the accident involved car A of mass 1500kg which crashed into stationary car B of mass 1100kg. the driver of car A applied his brakes 15 m before he skidded and crashed into car B. after the collision, car A s
Samuel Reply
can someone explain to me, an ignorant high school student, why the trend of the graph doesn't follow the fact that the higher frequency a sound wave is, the more power it is, hence, making me think the phons output would follow this general trend?
Joseph Reply
Nevermind i just realied that the graph is the phons output for a person with normal hearing and not just the phons output of the sound waves power, I should read the entire thing next time
Joseph
Follow up question, does anyone know where I can find a graph that accuretly depicts the actual relative "power" output of sound over its frequency instead of just humans hearing
Joseph
"Generation of electrical energy from sound energy | IEEE Conference Publication | IEEE Xplore" ***ieeexplore.ieee.org/document/7150687?reload=true
Ryan
what's motion
Maurice Reply
what are the types of wave
Maurice
answer
Magreth
progressive wave
Magreth
hello friend how are you
Muhammad Reply
fine, how about you?
Mohammed
hi
Mujahid
A string is 3.00 m long with a mass of 5.00 g. The string is held taut with a tension of 500.00 N applied to the string. A pulse is sent down the string. How long does it take the pulse to travel the 3.00 m of the string?
yasuo Reply
Who can show me the full solution in this problem?
Reofrir Reply
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Ece 301 projects fall 2003. OpenStax CNX. Jan 22, 2004 Download for free at http://cnx.org/content/col10223/1.5
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Ece 301 projects fall 2003' conversation and receive update notifications?

Ask