<< Chapter < Page Chapter >> Page >
This module describes the geometric experiment and the geometric probability distribution. This module is included in the Collaborative Statistics textbook/collection as an optional lesson.

The characteristics of a geometric experiment are:

  1. There are one or more Bernoulli trials with all failures except the last one, which is a success. In other words, you keep repeating what you are doing until the first success.Then you stop. For example, you throw a dart at a bull's eye until you hit the bull's eye. The first time you hit the bull's eye is a "success" so you stop throwing the dart. It mighttake you 6 tries until you hit the bull's eye. You can think of the trials as failure, failure, failure, failure, failure, success. STOP.
  2. In theory, the number of trials could go on forever. There must be at least one trial.
  3. The probability, p , of a success and the probability, q , of a failure is the same for each trial. p + q 1 and q 1 - p . For example, the probability of rolling a 3 when youthrow one fair die is 1 6 . This is true no matter how many times you roll the die. Suppose you want to know the probability of getting the first 3 on the fifth roll. On rolls1, 2, 3, and 4, you do not get a face with a 3. The probability for each of rolls 1, 2, 3, and 4 is q 5 6 , the probability of a failure. The probability of getting a 3 on the fifthroll is 5 6 5 6 5 6 5 6 1 6 0.0804
X = the number of independent trials until the first success. The mean and variance are in the summary in this chapter.

You play a game of chance that you can either win or lose (there are no other possibilities) until you lose. Your probability of losing is p = 0.57 . What is the probability that it takes 5 games until you lose? Let X = the number of games you play until you lose (includes the losing game). Then X takes on the values 1, 2, 3, ... (could go on indefinitely). The probability question is P ( x 5 ) .

Got questions? Get instant answers now!

A safety engineer feels that 35% of all industrial accidents in her plant are caused by failure of employees to follow instructions. She decides to look at theaccident reports (selected randomly and replaced in the pile after reading) until she finds one that shows an accident caused by failure of employees to follow instructions. On the average, how many reports would the safetyengineer expect to look at until she finds a report showing an accident caused by employee failure to follow instructions? What is the probability that the safety engineerwill have to examine at least 3 reports until she finds a report showing an accident caused by employee failure to follow instructions?

Let X = the number of accidents the safety engineer must examine until she finds a report showing an accident caused by employee failure to follow instructions. X takes on the values 1, 2, 3, .... The first question asks you to find the expected value or the mean. The second question asks you to find P ( x 3 ) . ("At least" translates as a"greater than or equal to" symbol).

Got questions? Get instant answers now!

Suppose that you are looking for a student at your college who lives within five miles of you. You know that 55% of the 25,000 students do live within five miles of you. You randomly contact students from the college until one says he/she lives within five miles of you. What is the probability that you need to contact four people?

This is a geometric problem because you may have a number of failures before you have the one success you desire. Also, the probability of a success stays the same each time you ask astudent if he/she lives within five miles of you. There is no definite number of trials (number of times you ask a student).

Let X = the number of ____________ you must ask ____________ one says yes.

Let X = the number of students you must ask until one says yes.

Got questions? Get instant answers now!

What values does X take on?

1, 2, 3, …, (total number of students)

Got questions? Get instant answers now!

What are p and q ?

  • p = 0.55
  • q = 0.45
Got questions? Get instant answers now!

The probability question is P(_______).

P ( x  =  4 )

Got questions? Get instant answers now!
Got questions? Get instant answers now!

Notation for the geometric: g = geometric probability distribution function

X ~ G(p)

Read this as " X is a random variable with a geometric distribution." The parameter is p . p = the probability of a success for each trial.

Assume that the probability of a defective computer component is 0.02. Components are randomly selected. Find the probability that the first defect is caused by the 7th componenttested. How many components do you expect to test until one is found to be defective?

Let X = the number of computer components tested until the first defect is found.

X takes on the values 1, 2, 3, ... where p = 0.02 . X ~ G(0.02)

Find P ( x 7 ) . P ( x 7 ) 0.0177 . (calculator or computer)

TI-83+ and TI-84: For a general discussion, see this example (binomial) . The syntax is similar. The geometric parameter list is (p, number) If "number" is left out, the result is thegeometric probability table. For this problem: After you are in 2nd DISTR, arrow down to D:geometpdf. Press ENTER. Enter .02,7). The result is P ( x 7 ) 0.0177 .

The probability that the 7th component is the first defect is 0.0177.

The graph of X ~ G(0.02) is:

The geometric probability distribution function graph consists of bars sloping downwards with each successive bar to the right. The x-axis is from 1-∞ and the y-axis is from 0-0.02 in increments of 0.005. The x-axis is equal to the number of computer components tested until the defect is found.

The y -axis contains the probability of x , where X = the number of computer components tested.

The number of components that you would expect to test until you find the first defective one is the mean, μ = 50.

The formula for the mean is μ 1 p 1 0.02 50

The formula for the variance is σ 2 1 p ( 1 p - 1 ) 1 0.02 ( 1 0.02 - 1 ) 2450

The standard deviation is σ 1 p ( 1 p - 1 ) 1 0.02 ( 1 0.02 - 1 ) 49.5

Got questions? Get instant answers now!

Questions & Answers

A golfer on a fairway is 70 m away from the green, which sits below the level of the fairway by 20 m. If the golfer hits the ball at an angle of 40° with an initial speed of 20 m/s, how close to the green does she come?
Aislinn Reply
cm
tijani
what is titration
John Reply
what is physics
Siyaka Reply
A mouse of mass 200 g falls 100 m down a vertical mine shaft and lands at the bottom with a speed of 8.0 m/s. During its fall, how much work is done on the mouse by air resistance
Jude Reply
Can you compute that for me. Ty
Jude
what is the dimension formula of energy?
David Reply
what is viscosity?
David
what is inorganic
emma Reply
what is chemistry
Youesf Reply
what is inorganic
emma
Chemistry is a branch of science that deals with the study of matter,it composition,it structure and the changes it undergoes
Adjei
please, I'm a physics student and I need help in physics
Adjanou
chemistry could also be understood like the sexual attraction/repulsion of the male and female elements. the reaction varies depending on the energy differences of each given gender. + masculine -female.
Pedro
A ball is thrown straight up.it passes a 2.0m high window 7.50 m off the ground on it path up and takes 1.30 s to go past the window.what was the ball initial velocity
Krampah Reply
2. A sled plus passenger with total mass 50 kg is pulled 20 m across the snow (0.20) at constant velocity by a force directed 25° above the horizontal. Calculate (a) the work of the applied force, (b) the work of friction, and (c) the total work.
Sahid Reply
you have been hired as an espert witness in a court case involving an automobile accident. the accident involved car A of mass 1500kg which crashed into stationary car B of mass 1100kg. the driver of car A applied his brakes 15 m before he skidded and crashed into car B. after the collision, car A s
Samuel Reply
can someone explain to me, an ignorant high school student, why the trend of the graph doesn't follow the fact that the higher frequency a sound wave is, the more power it is, hence, making me think the phons output would follow this general trend?
Joseph Reply
Nevermind i just realied that the graph is the phons output for a person with normal hearing and not just the phons output of the sound waves power, I should read the entire thing next time
Joseph
Follow up question, does anyone know where I can find a graph that accuretly depicts the actual relative "power" output of sound over its frequency instead of just humans hearing
Joseph
"Generation of electrical energy from sound energy | IEEE Conference Publication | IEEE Xplore" ***ieeexplore.ieee.org/document/7150687?reload=true
Ryan
what's motion
Maurice Reply
what are the types of wave
Maurice
answer
Magreth
progressive wave
Magreth
hello friend how are you
Muhammad Reply
fine, how about you?
Mohammed
hi
Mujahid
A string is 3.00 m long with a mass of 5.00 g. The string is held taut with a tension of 500.00 N applied to the string. A pulse is sent down the string. How long does it take the pulse to travel the 3.00 m of the string?
yasuo Reply
Who can show me the full solution in this problem?
Reofrir Reply
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply
Practice Key Terms 1

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Collaborative statistics. OpenStax CNX. Jul 03, 2012 Download for free at http://cnx.org/content/col10522/1.40
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Collaborative statistics' conversation and receive update notifications?

Ask