<< Chapter < Page Chapter >> Page >

Tenor trombone range

Above and below are the practical ranges for the tenor and bass trombone. Experienced players may be able to play above and below these ranges, and exceptional players can play much higher notes.

Bass trombone range

History

Unlike most other wind instruments , the basic design of the trombone has not changed much for centuries. It was developed in Europe, first appearing as the sackbut in the 1400's. In the 1800's, when valves were being added to other brass instruments such as the trumpet and horn, there were also experimental valve trombones, but they never gained much popularity. A modern trombone may have one or two valves that help extend its lower range, but the main work of changing pitches is still done using the slide.

At first, the sackbut/trombone was used mainly as a church instrument. Its timbre was considered to blend well with voices, and its ability to use its slide to make the subtle changes in tuning needed for the different church modes made it ideal to accompany plainsong chant.

Possibly because of its strong association with church music, the trombone was used sparingly in orchestras until the late Romantic period. Even when it did appear in the concert hall, it was often used to evoke religion, mortality, or the supernatural. (Examples of this include Beethoven's Symphony No. 5 , Rimsky-Korsakov's Russian Easter Overture , the appearance of the ghost in Mozart's Don Giovanni , and Weber's Der Freischutz , another opera with supernatural themes.)

Eventually the organ replaced the trombone in church music, the association faded, and the trombone became a full member of the orchestra. It also became a key instrument in many kinds of bands, and its strongest association these days is probably with marching bands and jazz bands.

The various trombones originally played in the clefs deemed appropriate for their parts, alto trombones playing mostly in alto clef, for example. Nowadays, beginning trombone players learn bass clef, and most modern parts for both tenor and bass trombone are in bass clef. However, it is not uncommon for older parts to still appear in their original clef; the first trombone part may be in alto clef, for example, the second in tenor, and the third in bass clef. Or more than one clef might appear on the same part. British band music often includes transposing treble clef parts for the trombones.

Repertoire

Trombones are a perennial favorite band instrument. Listen for trombones in jazz bands, particularly "big band" music (Tommy Dorsey was a trombone player) and dixieland jazz. Popular marches like Sousa's The Stars and Stripes Forever and National Emblem , and King's Barnum and Bailey's Favorite (to name just a few examples out of many) also tend to feature the trombone, sometimes on melody , but even more often in the countermelody . Most smaller brass ensembles will have at least one trombone: brass quintets and the works of Gabrieli (originally written to be played in church by sackbuts and other early brass instruments) are the easiest to find. Trombones usually play a supporting role in orchestras, but you may want to look up the pieces mentioned in the history section above . Other orchestral pieces that feature low brass, including trombones:

  • Gustav Holst's The Planets , particularly "Mars" and "Uranus", but also "Jupiter" and "Saturn"
  • Ravel's orchestration of Moussorgsky's Pictures at an Exhibition and Rimsky-Korsakov's popular orchestration of Moussorgsky's Night on Bare Mountain (also translated Night on Bald Mountain ).
  • Listen for sliding trombone glissandos in Khatchaturian's Sabre Dance

Practical information for composers and arrangers

The trombone may be considered to be "in B flat", since its first position gives a B flat harmonic series , but it is usually a non-transposing instrument with concert-pitch (C) parts. Modern trombone music is normally written in bass clef. However, as mentioned above , older trombone parts were often written in alto or tenor clef (and very occasionally treble). So parts to many famous classical pieces are still in these clefs, and modern trombone parts also occasionally use tenor or alto clef. These parts are also non-transposing, concert-pitch parts. Most American band and jazz music has the trombone reading mostly bass clef, and usually at concert pitch. But British brass bands often have the higher trombone parts written in treble clef as a transposing B flat instrument. Thus many trombone players will be comfortable reading parts in whatever clef you would like and even transposing on sight; but if you are writing for a particular ensemble, you may want to find out what clefs and transpositions the players are comfortable reading.

Trombones have a bright, brassy timbre that is easily heard even outdoors or even in a large ensemble. Because of long-standing association with certain types of music, the sound of a trombone is ideal for marches, fanfares, and solemn processionals, but also any time you want a jazzy sound.

When you want unusual effects, remember that short glissandos are a trombone specialty. A short glissando that stays within the range of a single (seventh-to-first-position) partial is very easy for even inexperienced players. Several different kinds of mutes are also available that give a variety timbres , some very popular for jazz, and some that are also capable of ear-catching effects such as the plunger-mute "wah".

Because of the realities of changing notes with a slide, the trombone is not as agile as many other instruments. Do not write long passages of very fast notes. Even short passages of very fast notes are not advisable in some keys. Be aware that slurring smoothly is more difficult for trombone than for valved brass.

Questions & Answers

A golfer on a fairway is 70 m away from the green, which sits below the level of the fairway by 20 m. If the golfer hits the ball at an angle of 40° with an initial speed of 20 m/s, how close to the green does she come?
Aislinn Reply
cm
tijani
what is titration
John Reply
what is physics
Siyaka Reply
A mouse of mass 200 g falls 100 m down a vertical mine shaft and lands at the bottom with a speed of 8.0 m/s. During its fall, how much work is done on the mouse by air resistance
Jude Reply
Can you compute that for me. Ty
Jude
what is the dimension formula of energy?
David Reply
what is viscosity?
David
what is inorganic
emma Reply
what is chemistry
Youesf Reply
what is inorganic
emma
Chemistry is a branch of science that deals with the study of matter,it composition,it structure and the changes it undergoes
Adjei
please, I'm a physics student and I need help in physics
Adjanou
chemistry could also be understood like the sexual attraction/repulsion of the male and female elements. the reaction varies depending on the energy differences of each given gender. + masculine -female.
Pedro
A ball is thrown straight up.it passes a 2.0m high window 7.50 m off the ground on it path up and takes 1.30 s to go past the window.what was the ball initial velocity
Krampah Reply
2. A sled plus passenger with total mass 50 kg is pulled 20 m across the snow (0.20) at constant velocity by a force directed 25° above the horizontal. Calculate (a) the work of the applied force, (b) the work of friction, and (c) the total work.
Sahid Reply
you have been hired as an espert witness in a court case involving an automobile accident. the accident involved car A of mass 1500kg which crashed into stationary car B of mass 1100kg. the driver of car A applied his brakes 15 m before he skidded and crashed into car B. after the collision, car A s
Samuel Reply
can someone explain to me, an ignorant high school student, why the trend of the graph doesn't follow the fact that the higher frequency a sound wave is, the more power it is, hence, making me think the phons output would follow this general trend?
Joseph Reply
Nevermind i just realied that the graph is the phons output for a person with normal hearing and not just the phons output of the sound waves power, I should read the entire thing next time
Joseph
Follow up question, does anyone know where I can find a graph that accuretly depicts the actual relative "power" output of sound over its frequency instead of just humans hearing
Joseph
"Generation of electrical energy from sound energy | IEEE Conference Publication | IEEE Xplore" ***ieeexplore.ieee.org/document/7150687?reload=true
Ryan
what's motion
Maurice Reply
what are the types of wave
Maurice
answer
Magreth
progressive wave
Magreth
hello friend how are you
Muhammad Reply
fine, how about you?
Mohammed
hi
Mujahid
A string is 3.00 m long with a mass of 5.00 g. The string is held taut with a tension of 500.00 N applied to the string. A pulse is sent down the string. How long does it take the pulse to travel the 3.00 m of the string?
yasuo Reply
Who can show me the full solution in this problem?
Reofrir Reply
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, A parent's guide to band. OpenStax CNX. Jun 25, 2007 Download for free at http://cnx.org/content/col10428/1.1
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'A parent's guide to band' conversation and receive update notifications?

Ask