<< Chapter < Page Chapter >> Page >
The module discusses the concept of stationarity in random processes and describes the various types. Also, a review of distribution and density functions is provided to aid in the understanding of stationarity.

Introduction

From the definition of a random process , we know that all random processes are composed of random variables, each at its ownunique point in time. Because of this, random processes have all the properties of random variables, such as mean,correlation, variances, etc.. When dealing with groups of signals or sequences it will be important for us to be able toshow whether of not these statistical properties hold true for the entire random process. To do this, the concept of stationary processes has been developed. The general definition of a stationary process is:

stationary process
a random process where all of its statistical properties do not vary with time
Processes whose statistical properties do change are referred to as nonstationary .

Understanding the basic idea of stationarity will help you to be able to follow the more concrete and mathematical definitionto follow. Also, we will look at various levels of stationarity used to describe the various types ofstationarity characteristics a random process can have.

Distribution and density functions

In order to properly define what it means to be stationary from a mathematical standpoint, one needs to be somewhatfamiliar with the concepts of distribution and density functions. If you can remember your statistics then feel freeto skip this section!

Recall that when dealing with a single random variable, the probability distribution function is a simply tool used to identify the probability that our observed randomvariable will be less than or equal to a given number. More precisely, let X be our random variable, and let x be our given value; from this we can define the distribution function as

F x x X x
This same idea can be applied to instances where we have multiple random variables as well. There may be situationswhere we want to look at the probability of event X and Y both occurring. For example, below is an example of a second-order joint distribution function .
F x x y X x Y y

While the distribution function provides us with a full view of our variable or processes probability, it is not always themost useful for calculations. Often times we will want to look at its derivative, the probability density function (pdf) . We define the the pdf as

f x x x F x x
f x x dx x X x dx
reveals some of the physical significance of the density function. This equations tellsus the probability that our random variable falls within a given interval can be approximated by f x x dx . From the pdf, we can now use our knowledge of integrals to evaluate probabilities from the aboveapproximation. Again we can also define a joint density function which will include multiple random variablesjust as was done for the distribution function. The density function is used for a variety of calculations, such as findingthe expected value or proving a random variable is stationary, to name a few.

The above examples explain the distribution and density functions in terms of a single random variable, X . When we are dealing with signals and random processes, remember that we will have a set of randomvariables where a different random variable will occur at each time instance of the random process, X t k . In other words, the distribution and density function will also need to take into account the choice oftime.

Stationarity

Below we will now look at a more in depth and mathematical definition of a stationary process. As was mentionedpreviously, various levels of stationarity exist and we will look at the most common types.

First-order stationary process

A random process is classified as first-order stationary if its first-order probability density function remains equal regardless of any shift in time toits time origin. If we let x t 1 represent a given value at time t 1 , then we define a first-order stationary as one that satisfies the following equation:

f x x t 1 f x x t 1
The physical significance of this equation is that our density function, f x x t 1 , is completely independent of t 1 and thus any time shift, .

The most important result of this statement, and the identifying characteristic of any first-order stationaryprocess, is the fact that the mean is a constant, independent of any time shift. Below we show the resultsfor a random process, X , that is a discrete-time signal, x n .

X m x n x n constant (independent of n)

Second-order and strict-sense stationary process

A random process is classified as second-order stationary if its second-order probability density function does not vary over any time shift applied to bothvalues. In other words, for values x t 1 and x t 2 then we will have the following be equal for an arbitrary time shift .

f x x t 1 x t 2 f x x t 1 x t 2
From this equation we see that the absolute time does not affect our functions, rather it only really depends on thetime difference between the two variables. Looked at another way, this equation can be described as
X t 1 x 1 X t 2 x 2 X t 1 x 1 X t 2 x 2

These random processes are often referred to as strict sense stationary (SSS) when all of the distribution functions of the process are unchanged regardless of the time shift applied to them.

For a second-order stationary process, we need to look at the autocorrelation function to see its most important property. Since we have already stated that a second-order stationaryprocess depends only on the time difference, then all of these types of processes have the following property:

R x x t t X t X t R x x

Wide-sense stationary process

As you begin to work with random processes, it will become evident that the strict requirements of a SSS process ismore than is often necessary in order to adequately approximate our calculations on random processes. We definea final type of stationarity, referred to as wide-sense stationary (WSS) , to have slightly more relaxed requirements but ones that are still enough toprovide us with adequate results. In order to be WSS a random process only needs to meet the following tworequirements.

  • X x n constant
  • X t X t R x x
Note that a second-order (or SSS) stationary process willalways be WSS; however, the reverse will not always hold true.

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Intro to digital signal processing. OpenStax CNX. Jan 22, 2004 Download for free at http://cnx.org/content/col10203/1.4
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Intro to digital signal processing' conversation and receive update notifications?

Ask