1. Home
  2. Introductory physics - for kpu
  3. Electric current, resistance,
  4. Resistance and resistivity

11.3 Resistance and resistivity

<< Chapter < Page
  Introductory physics - for kpu     Page 1 / 6
Chapter >> Page >
  • Explain the concept of resistivity.
  • Use resistivity to calculate the resistance of specified configurations of material.
  • Use the thermal coefficient of resistivity to calculate the change of resistance with temperature.

Material and shape dependence of resistance

The resistance of an object depends on its shape and the material of which it is composed. The cylindrical resistor in [link] is easy to analyze, and, by so doing, we can gain insight into the resistance of more complicated shapes. As you might expect, the cylinder’s electric resistance R size 12{R} {} is directly proportional to its length L size 12{L} {} , similar to the resistance of a pipe to fluid flow. The longer the cylinder, the more collisions charges will make with its atoms. The greater the diameter of the cylinder, the more current it can carry (again similar to the flow of fluid through a pipe). In fact, R size 12{R} {} is inversely proportional to the cylinder’s cross-sectional area A size 12{A} {} .

A cylindrical conductor of length L and cross section A is shown. The resistivity of the cylindrical section is represented as rho. The resistance of this cross section R is equal to rho L divided by A. The section of length L of cylindrical conductor is shown equivalent to a resistor represented by symbol R.
A uniform cylinder of length L size 12{L} {} and cross-sectional area A size 12{A} {} . Its resistance to the flow of current is similar to the resistance posed by a pipe to fluid flow. The longer the cylinder, the greater its resistance. The larger its cross-sectional area A size 12{A} {} , the smaller its resistance.

For a given shape, the resistance depends on the material of which the object is composed. Different materials offer different resistance to the flow of charge. We define the resistivity     ρ size 12{ρ} {} of a substance so that the resistance R size 12{R} {} of an object is directly proportional to ρ size 12{ρ} {} . Resistivity ρ size 12{ρ} {} is an intrinsic property of a material, independent of its shape or size. The resistance R size 12{R} {} of a uniform cylinder of length L size 12{L} {} , of cross-sectional area A size 12{A} {} , and made of a material with resistivity ρ size 12{ρ} {} , is

R = ρL A . size 12{R = { {ρL} over {A} } "."} {}

[link] gives representative values of ρ size 12{ρ} {} . The materials listed in the table are separated into categories of conductors, semiconductors, and insulators, based on broad groupings of resistivities. Conductors have the smallest resistivities, and insulators have the largest; semiconductors have intermediate resistivities. Conductors have varying but large free charge densities, whereas most charges in insulators are bound to atoms and are not free to move. Semiconductors are intermediate, having far fewer free charges than conductors, but having properties that make the number of free charges depend strongly on the type and amount of impurities in the semiconductor. These unique properties of semiconductors are put to use in modern electronics, as will be explored in later chapters.

Resistivities ρ size 12{ρ} {} Of various materials at 20º C
Material Resistivity ρ size 12{ρ} {} ( Ω ⋅ m size 12{ %OMEGA cdot m} {} )
Conductors
Silver 1 . 59 × 10 − 8 size 12{1 "." "59" times "10" rSup { size 8{ - 8} } } {}
Copper 1 . 72 × 10 − 8 size 12{1 "." "72" times "10" rSup { size 8{ - 8} } } {}
Gold 2 . 44 × 10 − 8 size 12{2 "." "44" times "10" rSup { size 8{ - 8} } } {}
Aluminum 2 . 65 × 10 − 8 size 12{2 "." "65" times "10" rSup { size 8{ - 8} } } {}
Tungsten 5 . 6 × 10 − 8 size 12{5 "." 6 times "10" rSup { size 8{ - 8} } } {}
Iron 9 . 71 × 10 − 8 size 12{9 "." "71" times "10" rSup { size 8{ - 8} } } {}
Platinum 10 . 6 × 10 − 8 size 12{"10" "." 6 times "10" rSup { size 8{ - 8} } } {}
Steel 20 × 10 − 8 size 12{"20" times "10" rSup { size 8{ - 8} } } {}
Lead 22 × 10 − 8 size 12{"22" times "10" rSup { size 8{ - 8} } } {}
Manganin (Cu, Mn, Ni alloy) 44 × 10 − 8 size 12{"44" times "10" rSup { size 8{ - 8} } } {}
Constantan (Cu, Ni alloy) 49 × 10 − 8 size 12{"49" times "10" rSup { size 8{ - 8} } } {}
Mercury 96 × 10 − 8 size 12{"96" times "10" rSup { size 8{ - 8} } } {}
Nichrome (Ni, Fe, Cr alloy) 100 × 10 − 8 size 12{"100" times "10" rSup { size 8{ - 8} } } {}
Semiconductors Values depend strongly on amounts and types of impurities
Carbon (pure) 3.5 × 10 5
Carbon ( 3.5 − 60 ) × 10 5
Germanium (pure) 600 × 10 − 3
Germanium ( 1 − 600 ) × 10 − 3 size 12{ \( 1 - "600" \) times "10" rSup { size 8{ - 3} } } {}
Silicon (pure) 2300
Silicon 0.1–2300
Insulators
Amber 5 × 10 14 size 12{5 times "10" rSup { size 8{"14"} } } {}
Glass 10 9 − 10 14 size 12{"10" rSup { size 8{9} } - "10" rSup { size 8{"14"} } } {}
Lucite >10 13 size 12{>"10" rSup { size 8{"13"} } } {}
Mica 10 11 − 10 15 size 12{"10" rSup { size 8{"11"} } - "10" rSup { size 8{"15"} } } {}
Quartz (fused) 75 × 10 16 size 12{"75" times "10" rSup { size 8{"16"} } } {}
Rubber (hard) 10 13 − 10 16 size 12{"10" rSup { size 8{"13"} } - "10" rSup { size 8{"16"} } } {}
Sulfur 10 15 size 12{"10" rSup { size 8{"15"} } } {}
Teflon >10 13 size 12{>"10" rSup { size 8{"13"} } } {}
Wood 10 8 − 10 11 size 12{"10" rSup { size 8{8} } - "10" rSup { size 8{"11"} } } {}

Questions & Answers

A golfer on a fairway is 70 m away from the green, which sits below the level of the fairway by 20 m. If the golfer hits the ball at an angle of 40° with an initial speed of 20 m/s, how close to the green does she come?
Aislinn Reply
cm
tijani
what is titration
John Reply
what is physics
Siyaka Reply
A mouse of mass 200 g falls 100 m down a vertical mine shaft and lands at the bottom with a speed of 8.0 m/s. During its fall, how much work is done on the mouse by air resistance
Jude Reply
Can you compute that for me. Ty
Jude
what is the dimension formula of energy?
David Reply
what is viscosity?
David
what is inorganic
emma Reply
what is chemistry
Youesf Reply
what is inorganic
emma
Chemistry is a branch of science that deals with the study of matter,it composition,it structure and the changes it undergoes
Adjei
please, I'm a physics student and I need help in physics
Adjanou
chemistry could also be understood like the sexual attraction/repulsion of the male and female elements. the reaction varies depending on the energy differences of each given gender. + masculine -female.
Pedro
A ball is thrown straight up.it passes a 2.0m high window 7.50 m off the ground on it path up and takes 1.30 s to go past the window.what was the ball initial velocity
Krampah Reply
2. A sled plus passenger with total mass 50 kg is pulled 20 m across the snow (0.20) at constant velocity by a force directed 25° above the horizontal. Calculate (a) the work of the applied force, (b) the work of friction, and (c) the total work.
Sahid Reply
you have been hired as an espert witness in a court case involving an automobile accident. the accident involved car A of mass 1500kg which crashed into stationary car B of mass 1100kg. the driver of car A applied his brakes 15 m before he skidded and crashed into car B. after the collision, car A s
Samuel Reply
can someone explain to me, an ignorant high school student, why the trend of the graph doesn't follow the fact that the higher frequency a sound wave is, the more power it is, hence, making me think the phons output would follow this general trend?
Joseph Reply
Nevermind i just realied that the graph is the phons output for a person with normal hearing and not just the phons output of the sound waves power, I should read the entire thing next time
Joseph
Follow up question, does anyone know where I can find a graph that accuretly depicts the actual relative "power" output of sound over its frequency instead of just humans hearing
Joseph
"Generation of electrical energy from sound energy | IEEE Conference Publication | IEEE Xplore" ***ieeexplore.ieee.org/document/7150687?reload=true
Ryan
what's motion
Maurice Reply
what are the types of wave
Maurice
answer
Magreth
progressive wave
Magreth
hello friend how are you
Muhammad Reply
fine, how about you?
Mohammed
hi
Mujahid
A string is 3.00 m long with a mass of 5.00 g. The string is held taut with a tension of 500.00 N applied to the string. A pulse is sent down the string. How long does it take the pulse to travel the 3.00 m of the string?
yasuo Reply
Who can show me the full solution in this problem?
Reofrir Reply
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply
<< Chapter < Page Page > Chapter >>
Practice Key Terms 2

Read also:

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Introductory physics - for kpu phys 1100 (2015 edition). OpenStax CNX. May 30, 2015 Download for free at http://legacy.cnx.org/content/col11588/1.13
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Introductory physics - for kpu phys 1100 (2015 edition)' conversation and receive update notifications?

Ask