0.3 Determining when and which drum was hit through velocity

Hitting the drums: a velocity computational approach

You now have the positions of the LEDs in every frame. Our goal here is to detect when and which drums were hit so that the corresponding drums can produce their sounds.

Determining when a drum was hit

There are various innovative ways of tracking when the drums are hit. We chose to use a velocity computational approach due to its speed. Using this approach, you can look at the displacement of the LEDs in consecutive frames and calculate the velocity. Using basic physics, if the velocity changes from positive to negative (note that our coordinate system has the positive side of the y-axis pointing downwards) it implies a change in direction of the drumstick, or that a drum was hit. You should be able to figure out approximately which frame the drum was hit in. Since the hit point is returned in terms of two-dimensional coordinates, you can figure out which drum(s) are hit.

Determining which drum was hit

The frame should be broken down into rectangles with assigned x and y coordinates where the drums are positioned. Our drum kit consists of the Crash Cymbal, the Big Tom, the Small Tom, the Floor Tom and the Snare. We check to see if the hit-point falls in the space assigned for any of the drums, and if it does, we move on to producing the sound and displaying the image on the computer screen. However, if the hit point is outside the frame, it is taken as a missed hit.