A Class Fitout Tradesman- AWC- Painter

Austal
US - Alabama - Selma
November 7, 2024

Any qualified individual with a disability who is having difficulty in completing an application because of incompatible technology or other disability-related application issues may contact us at the following phone number for assistance: ***.

Austal shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability. Austal's commitment to equal employment opportunity applies at all levels of employment, in all job titles, including the executive level, and to all employment actions, including but not limited to decisions concerning recruitment, hiring, training, and promotion.

REPORTS TO: Fit Out Supervisor

SUPERVISES: N/A

AUTHORITIES / RESPONSIBILITIES:

Perform all tasks and responsibilities associated with TA and B Class status
Layout all joiner inclusive of bulkheads, doors, ceilings, shelving, furniture, consoles and all attachments from drawings with minimal supervision.
Prefab bulkheads, doors, ceilings, shelving, furniture, consoles and all attachments from drawings with minimal supervision
Install bulkheads, doors, ceilings, shelving, furniture, consoles and all attachments from drawings with minimal supervision
Mark out, shoot pins, and insulate deck head, side shells, beams, and all duct with minimal supervision
Measure, build, and install pads with minimal supervision
Run and cut all fittings on various pipe coverings, and lag it out- with little or no seams showing
Run metal and operate shear and break
Read metric and standard tape measure
Take drawing to job site with material and work with minimal supervision
Measure duct /fittings and install same
Mount and install equipment such as valves, air hangers
Lay out hangers, penos, duct, etc
Understand the principals of interior painting and be able to accomplish same
Functional working knowledge of blueprints and construction information.

QUALIFICATIONS / KNOWLEDGE / EXPERIENCE:

Three (3) progressive years marine experience or (5) years comparable trade experience in the construction industry.
Working knowledge of practices, methods, materials, and equipment used in cabinet making, carpentry, industrial insulation and HVAC.
Basic mechanical skills and trades mathematics
Ability to read mechanical drawings and blueprints

TOOLS:

Maintain knowledge of tools and proper handling and usage:

Table saw
Drill press
Planer
Radial arm saw
Nail/ rivet gun
Drills
Reciprocating saw
Laminate trimmer
Grinder
Jigsaw
Disc sanders
CNC Shear
CNC Break
Iron Worker
Rivet gun
Cordless drill
Compass saw
Banders

DIRECTION EXERCISED: May direct the work of Trades Assistants and/or B Class employees

DISCRETION EXERCISED: Interpret blueprints, perform material takeoffs

LIASES WITH: Trade supervisors, trade personnel

ADDITIONAL GUIDELINES: Candidates must be able to provide proof of US Person status.

PHYSICAL REQUIREMENTS:

Specific physical requirements include the following:

Must have the ability to bend, squat, stoop, crawl, and kneel.
Perform prolonged standing.
Ability to turn head from side to side and about the vertical axis.
Ability to turn body at the waist from side to side and about the vertical axis.
Lift/push/pull 50lbs to 75lbs on an occasional basis.
Lift/push/pull up to 20lbs on a frequent basis.
Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps).
Ability to work at heights above 12' while working from ladders, scaffolding and/or man lifts.
Able to work at a variety of levels (ex. waist, eye, overhead).
Demonstrate the ability to safely and appropriately use required tools and equipment.
Demonstrate good balance while working on uneven surfaces and maneuvering obstacles.
Possess sufficient handgrip and coordination to carry and operate tools and equipment.
Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards.
Ability to withstand cold and hot temperatures.
Ability to enter 18" x 36" openings and work in confined spaces for prolonged periods of time.
Able to respond to verbal and audible sounds/commands.
Able to utilize adequate visual skills.
Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down.
Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters whole performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly exposed to humid conditions, moving mechanical parts, high precarious places, outside weather conditions, and extreme heat. The employee is occasionally exposed to fumes and/or airborne particles, toxic or caustic chemicals, and heat and cold. The noise level in the work environment is usually very loud.

SAFETY

Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks.

Read the full job description and apply online on the recuiter's web-site

A Class Fitout Tradesman- AWC- Painter

A Class Fitout Tradesman- AWC- Painter

Find Jobs Hiring Now Near You!

Get Jobilize Job Search Mobile App Now

Related Job Postings

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

Pediatric Radiologist Needed for Locum Tenens Coverage at Facility in Southern Alabama

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

Family Medicine Physician

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

Emergency Medicine Physician Needed for Locum Tenens Coverage at Facility in Northport, Alabama

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

Adult Psychiatrist Needed for Locum Tenens Vacancy Coverage at Facility in Eastern Alabama

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

Mammographer Radiology Physician

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

Family Medicine Physician Needed for Locum Tenens Coverage at Facility in Gadsden, Alabama

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd

OTR CDL-A Drivers 61,776 73,216+ Yearly / 3 Months EXP Req'd