Crane Operator

Roles and responsibilities Operate platform pedestal and overhead gantry cranes under the direction of nominated platform personnel and in accordance with manufacturer's instructions and platform operating procedures.The crane operator should only respond to the instruction (signals) given by the Rigger or appointed Signaler, however he shall follow the Emergency Stop Signal from any one at site in case of any emergency.Carry out daily pre-operational checks on the cranes in accordance with pre-use checklist.The crane Operator shall also be responsible for reporting all defects noted during operation of the crane to the crane supervisor.Able to set and check the functioning of the rated capacity limiter and rated capacity indicator.Responsible for effectively carrying out scheduled planned maintenance routines up to (6 monthly) of all offshore pedestal and overhead cranes, with the objective of maintaining safe operations.Maintain cranes in a clean and tidy condition, including cabs, machinery housing and external surfaces.Carry out Platform Emergency Duties under the direction of nominated personnel.Keep a logbook of crane operations.In addition to crane maintenance duties, operate overhead cranes under the direction of nominated site personnel and in accordance with authorized operators instructions manual and site operating procedures.When working overhead cranes, carry out daily routine on the crane in accordance with maintenance procedures and pre-start checklist.Inspect the job site to ensure compliance with safe practices and procedures.
Maintain quality of safety in the crane group and participate in the site safety reviews i.e.
Near Miss Reporting/STOP cards.Responsible for giving a detailed report of any crane incidents to the Crane Supervisor.
Requirements Must read and write English fluentlyBe experienced, fully trained and competent in the operation and maintenance of offshore pedestal cranes.Must have adequate understanding of the capabilities and limitations of each crane with regard to offshore operation, and of the various installed mechanisms, control and safety systems.Educated to a minimum qualification of higher secondary school certificate or HNC or equivalentqualification.At Least a minimum of 5 years' experience in an offshore/onshore experience and a minimum of 3 years in similar position.Have an Offshore Stage 3 Crane Operator certificate.Must have sufficient general engineering knowledge of the lifting equipment to carry out routine maintenance and inspection routines up to 3 monthly PM.Should assist mechanics and ad-hoc crew in completing, routine maintenance, major maintenance, troubleshooting and breakdown maintenance.Should also be multi-skilled in other platform duties including operating firefighting equipment and undertaking fire standby duties, acting as slinger, Banks man/Signal man, Rigger and deck duties, when required.Should complete reports, logs and other documentation, as required & shall maintain the cranes in clean condition, internally and externally.
Desired candidate profile 1.
Equipment Used on the Lifting Operations Deck:
Cranes:
These are the primary lifting equipment used to move heavy loads.
Offshore cranes, container cranes, and mobile cranes may all be used depending on the operation.Winches and Hoists:
Used for pulling or lifting equipment and materials vertically or horizontally.Slings, Shackles, and Rigging Gear:
Various tools are used to secure loads before lifting, including wire ropes, synthetic slings, and shackles.Lifting Beams and Spreaders:
These tools help distribute weight evenly and reduce the risk of tipping or damage to materials.Deck Cargo Handling Equipment:
In addition to lifting equipment, other specialized tools like forklifts, tugs, and tractors may be used to move materials around the deck area.2.
Personnel Involved in Lifting Operations:
Lifting Operations Coordinator:
Oversees and plans all lifting operations, ensuring they are executed safely and efficiently.Riggers:
Responsible for securing loads, preparing rigging systems, and ensuring safety during lifts.Crane Operators:
Operate cranes and hoisting equipment during lifting operations.Signalmen/Deck Crew:
Provide hand signals or radio communication to guide crane operators during lifting operations.Safety Officers:
Monitor operations to ensure compliance with safety regulations and procedures.Maintenance Personnel:
Ensure that all lifting equipment is in good working order by performing inspections, repairs, and maintenance.3.
Planning and Coordination of Lifting Operations:
Lift Plan:
A detailed plan is developed for each lifting operation, identifying the weight and type of load, the equipment to be used, and the personnel involved.
The plan includes a safety assessment, such as risk evaluations for potential hazards (e.g., weather conditions, load stability).Load Calculations:
Before any lifting operation, calculations are made to ensure the equipment being used (such as cranes or hoists) can safely handle the weight of the load.Weather Considerations:
Offshore lifting operations are highly influenced by weather conditions such as wind, waves, and visibility.
Lifting may be delayed or suspended if the weather poses a safety risk.Equipment Inspections:
Before starting any lift, equipment is thoroughly checked to ensure it is in proper working condition.
This includes the crane, rigging, and all associated gear.