<< Chapter < Page Chapter >> Page >

The grand interface: nano-bio-info

Consider that in 1970 the fabrication of a single transistor cost about 10 cents. The first Intel computer chip had 2300 transistors. This chip used 10,000 nanometer wide technology. The latest Intel Xeon processor (2014) uses 22 nanometer technology. These developments are driving down rapidly the costs of storage capacities and sequencing. In 1982 with the Intel 80386 chip, $1 bought several thousand transistors. By 2012, when chips contained as many as a billion transistors, $1 would buy 20 million transistors. Among other miracles, this has drastically reduced the cost of sequencing genes: less than a penny a pair. I leave it to you to imagine the future implications for preventative medicine.

The marriage of nano-bio and info technology is making deep inroads in detection and diagnosis of cancer, cardiac disease and severe traumatic injury. Researchers at Rice, M.D. Anderson and UTHSC have devised an inexpensive diagnostic nano-bio-info chip that promises to be quite effective in detecting both malignant and pre-malignant oral cancer and other diseases. With the chip, invasive, painful biopsies are not needed. Results are ready on the spot rather than days later, and the cost is affordable.

This chip is one of the growing number of biomarkers under development in nanomedicine. At present it is also being tested to detect heart attacks by analyzing saliva, with heartening results thus far. The chip works by deciphering body fluids such as saliva and blood to reveal unique chemical and biological constituents, and changes in them.

Tissue engineering, a field born less than 2 decades ago, is an excellent example of the grand interface. Traditional biomedical engineering used metals, polymers and ceramics to construct temporary or permanent replacements of body parts that interact minimally with surrounding tissue. I have one of those in my foot. These replacement parts often promote infections, wear out, and loosen with time. Tissue engineers take exactly the opposite approach: they design biologically active materials that interact extensively with adjacent tissues in order to facilitate the regeneration process. Blending materials and concepts from nanotechnology and information technology into biotechnology, the new field has begun to yield products for repair of damaged tissue. Skin for burn patients is already available from first generation tissue engineering. Tissue engineering more generally promises to allow fabrication of a range of spare human parts to replace diseased or spent ones, or even to improve functions of healthy tissue. Tissue engineering targets include bone, cartilage, blood substitutes and eventually a variety of organ replacements.

Already, scientists at Wake Forest University have grown gall bladders on artificial “scaffolds” of water soluble material. Seven patients have these new bladders, and they are still working. ( The Economist , February 20, 2010), while physicians in Europe have implanted lab-grown tracheas. In Japan several children are living with tissue-engineered cardiac blood vessels ( Science , Aug. 2011).

The second generation of tissue engineering is already upon us. Progress in rebuilding complex organs such as lungs will be difficult, but is no longer the stuff or science fiction. Tissue engineers, harnessing properties of intercellular communication, have even begun to induce in vivo heart muscle regeneration. If they are successful, it may be possible to generate muscle for a “cardiac muscle patch.” ( Science , February 12, 2010).

One new innovation in tissue engineering marries nanowires with human cells. In Sept. 2012 scientists from Harvard, MIT and other Boston-area universities announced the creation of Cyborg-like tissue, where a network of nanowires containing electrodes that will enable physicians to monitor changes in human tissue at levels not imagined before.

The third generation of tissue engineering is almost at hand. By 2020, engineers might deploy self-assembling nano-electronic components to create 3-D circuits to improve the tissue compatibility of implants. Especially promising are plans to print organs using inkjet technology to imprint stem cells. Scientists and engineers are adapting tissue engineering to deal with a multitude of medical problems such as kidney failure, atherosclerosis, spinal cord injuries, inflammations, age-related diseases, and osteoporosis. It now seems that there are only a few parts of the body that cannot be ultimately replaced with bio-artificial replications of body parts.

Conclusion: the nano-bio-info convergence

Nanotechnology will surely revolutionize energy and materials science. The potential for truly staggering applications of biotechnology as augmented by nano and information technology is also in little doubt. Whether much of this potential will be soon realized is, however, yet unclear. Financial constraints on transfer of innovations based on these technologies are loosening, but legal and regulatory constraints loom much larger than in past technological revolutions. In the U.S. the Food and Drug Administration has become increasingly risk-adverse in approving new genetic and nanotech treatments in medicine. And no one knows what the next session of congress will bring.

From genomics, biotechnology has already provided us with a complete parts list for humans. As a result of advances in wet nanotechnology and information technology, tissue engineering promises to provide widely available, inexpensive, and reliable spare parts for humans. If we can find ways to resolve ethical – and perhaps moral – issues raised by our fast-expanding capacities in these converging technologies, their economic and social impacts could be as profound and as positive as that wrought by any previous revolution in human history.

Even ten years ago, much of what we have discussed today seemed impossible. What can we say about that? We may close with a pithy quote from Arthur C. Clarke, the writer who first envisioned the idea of artificial earth satellites: “The only way to discover the limits to the possible is to venture a little past them – to the impossible.”

Developing nations who hope to successfully cope with the potential challenges arising from 21st century technology will clearly need to focus very strongly on programs of education and research that steadily enhances and expands the stock of human capital.

Questions & Answers

A golfer on a fairway is 70 m away from the green, which sits below the level of the fairway by 20 m. If the golfer hits the ball at an angle of 40° with an initial speed of 20 m/s, how close to the green does she come?
Aislinn Reply
cm
tijani
what is titration
John Reply
what is physics
Siyaka Reply
A mouse of mass 200 g falls 100 m down a vertical mine shaft and lands at the bottom with a speed of 8.0 m/s. During its fall, how much work is done on the mouse by air resistance
Jude Reply
Can you compute that for me. Ty
Jude
what is the dimension formula of energy?
David Reply
what is viscosity?
David
what is inorganic
emma Reply
what is chemistry
Youesf Reply
what is inorganic
emma
Chemistry is a branch of science that deals with the study of matter,it composition,it structure and the changes it undergoes
Adjei
please, I'm a physics student and I need help in physics
Adjanou
chemistry could also be understood like the sexual attraction/repulsion of the male and female elements. the reaction varies depending on the energy differences of each given gender. + masculine -female.
Pedro
A ball is thrown straight up.it passes a 2.0m high window 7.50 m off the ground on it path up and takes 1.30 s to go past the window.what was the ball initial velocity
Krampah Reply
2. A sled plus passenger with total mass 50 kg is pulled 20 m across the snow (0.20) at constant velocity by a force directed 25° above the horizontal. Calculate (a) the work of the applied force, (b) the work of friction, and (c) the total work.
Sahid Reply
you have been hired as an espert witness in a court case involving an automobile accident. the accident involved car A of mass 1500kg which crashed into stationary car B of mass 1100kg. the driver of car A applied his brakes 15 m before he skidded and crashed into car B. after the collision, car A s
Samuel Reply
can someone explain to me, an ignorant high school student, why the trend of the graph doesn't follow the fact that the higher frequency a sound wave is, the more power it is, hence, making me think the phons output would follow this general trend?
Joseph Reply
Nevermind i just realied that the graph is the phons output for a person with normal hearing and not just the phons output of the sound waves power, I should read the entire thing next time
Joseph
Follow up question, does anyone know where I can find a graph that accuretly depicts the actual relative "power" output of sound over its frequency instead of just humans hearing
Joseph
"Generation of electrical energy from sound energy | IEEE Conference Publication | IEEE Xplore" ***ieeexplore.ieee.org/document/7150687?reload=true
Ryan
what's motion
Maurice Reply
what are the types of wave
Maurice
answer
Magreth
progressive wave
Magreth
hello friend how are you
Muhammad Reply
fine, how about you?
Mohammed
hi
Mujahid
A string is 3.00 m long with a mass of 5.00 g. The string is held taut with a tension of 500.00 N applied to the string. A pulse is sent down the string. How long does it take the pulse to travel the 3.00 m of the string?
yasuo Reply
Who can show me the full solution in this problem?
Reofrir Reply
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Economic development for the 21st century. OpenStax CNX. Jun 05, 2015 Download for free at http://legacy.cnx.org/content/col11747/1.12
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Economic development for the 21st century' conversation and receive update notifications?

Ask