| << Chapter < Page | Chapter >> Page > |
In this module, I presented and explained four self-testing classes for plotting large quantities of data. One class plots a nearly unlimited amount ofsingle-channel data using multiple traces on multiple pages.
(I have successfully plotted two million data values in 141 full screen pages on a modest laptop computer with no difficulty whatsoever. WhenI pushed that total up to eight million data values in 563 full screen pages, the plotting process slowed down, but I was still able to display andexamine the plots. The practical limit on my computer seems to be somewhere between two million and eight million data values.)
A second class plots a large quantity of two-channel data superimposing the two data sets on the same axes with the plot of one data set being colored blackand the plot of the other data set being colored red.
A third class also plots a large quantity of two-channel data, but with this class, the two sets of data are plotted on alternating horizontal axes. Again,one set of data is colored black and the other set is colored red.
A fourth class plots a large quantity of three-channel data on separate axes. In this case, one set is colored black, the second set is colored red, and thethird set is colored blue.
Complete listings of the four programs that I explained in this module are provided in Listing 35 through Listing 38 below.
| Listing 35. PlotALot01.java. |
|---|
/*File PlotALot01.java
Copyright 2005, R.G.BaldwinThis program is designed to plot large amounts of
time-series data for a single channel. SeePlotALot02.java for a two-channel program.
Note that by carefully adjusting the plottingparameters, this program could also be used to
plot large quantities of spectral data in awaterfall display.
The class provides a main method so that theclass can be run as an application to test
itself.There are three steps involved in the use of this
class for plotting time series data:1. Instantiate a plotting object of type
PlotALot01 using one of two overloadedconstructors.
2. Feed data that is to be plotted to theplotting object by calling the feedData
method once for each data value.3. call one of two overloaded plotData methods
on the plotting object once all of the datahas been fed to the object. This causes all
of the data to be plotted.A using program can instantiate as manyplotting objects as are needed to plot all of the
different time series that need to be plotted.Each plotting object can be used to plot as many
data values as need be plotted until the programruns out of available memory.
The plotting object of type PlotALot01 owns oneor more Page objects that extend the Frame class.
The plotting object can own as many Page objectsas are necessary to plot all of the data that is
fed to that plotting object.The program produces a graphic output consisting
of a stack of Page objects on the screen, withthe data plotted on a Canvas object contained by
the Page object. The Page showing the earliestdata is on the top of the stack and the Page
showing the latest data is on the bottom of thestack. The Page objects on the top of the stack
must be physically moved in order to see thePage objects on the bottom of the stack.
Each Page object contains one or more horizontalaxes on which the data is plotted. The earliest
data is plotted on the axis nearest the top ofthe Page moving from left to right across the
axis. Positive data values are plotted abovethe axis and negative values are plotted below
the axis. When the right end of an axis isreached, the next data value is plotted on the
left end of the axis immediately below it. Whenthe right end of the last axis on the Page is
reached, a new Page object is created and thenext data value is plotted at the left end of the
top axis on that Page object.A mentioned above, there are two overloaded
versions of the constructor for the PlotALot01class. One overloaded version accepts several
incoming parameters allowing the user to controlvarious aspects of the plotting format. A second
overloaded version accepts a title string onlyand sets all of the plotting parameters to
default values. You can easily modify thesedefault values and recompile the class if you
prefer different default values.The parameters for the version of the constructor
that accepts plotting format information are:String title: Title for the Frame object. This
title is concatenated with the page number andthe result appears in the banner at the top of
the Frame.int frameWidth:The Frame width in pixels.
int frameHeight: The Frame height in pixels.int traceSpacing: Distance between trace axes in
pixels.int sampSpace: Number of pixels dedicated to each
data sample in pixels per sample. Must be 1 orgreater.
int ovalWidth: Width of an oval that is used tomark the sample value on the plot.
int ovalHeight: Height of an oval that is used tomark the sample value on the plot.
For test purposes, the main method instantiatesand feeds two independent plotting objects.
Plotting parameters are specified for the firstplotting object. Default plotting parameters are
accepted for the second plotting object.The data that is fed to each plotting object iswhite random noise. However, for the first
plotting object, fifteen of the data values arenot random. Rather, seven of the values are set
to values of 0,0,25,-25,25,0,0 to confirm theproper transition from the end of one page to the
beginning of the next page. In addition, eight ofthe values are set to 0,0,20,20,-20,-20,0,0 in
order to confirm the proper transition from onetrace to the next trace on the same page.
These specific values and the locations in thedata where they are placed provide visible
confirmation that the transitions mentioned aboveare handled correctly. Note, however that these
are the correct locations for an AWT Frame objectunder WinXP. A Frame may have different inset
values under other operating systems, which maycause these specific locations to be incorrect
for that operating system. In that case, thevalues will be plotted but they won't confirm
the proper transition.The following information about the plotting
parameters for each plotting object is displayedon the command line screen when the class is used
for plotting. The values shown below result fromthe execution of the main method of the class for
test purposes. One of the plotting objectsinstantiated by the main method is titled "A"
and the other is titled "B".Title: A
Frame width: 158Frame height: 237
Page width: 150Page height: 210
Trace spacing: 36Sample spacing: 5
Traces per page: 5Samples per page: 150
Title: BFrame width: 400
Frame height: 410Page width: 392
Page height: 383Trace spacing: 50
Sample spacing: 2Traces per page: 7
Samples per page: 1372There are two overloaded versions of the plotData
method. One version allows the user to specifythe location on the screen where the stack of
plotted pages will appear. This version requirestwo parameters, which are coordinate values in
pixels. The first parameter specifies thehorizontal coordinate of the upper left corner of
the stack of pages relative to the upper leftcorner of the screen. The second parameter
specifies the vertical coordinate of the upperleft corner of the stack of pages relative to the
upper left corner of the screen. Specifyingcoordinate values of 0,0 causes the stack to be
located in the upper left corner of the screen.The other overloaded version of plotData places
the stack of pages in the upper left corner ofthe screen by default.Each page has a WindowListener that will
terminate the program if the user clicks theclose button on the Frame.
The program was tested using J2SE 5.0 and WinXP.Requires J2SE 5.0 to support generics.
************************************************/import java.awt.*;
import java.awt.event.*;import java.util.*;
public class PlotALot01{//This main method is provided so that the
// class can be run as an application to test// itself.
public static void main(String[]args){
//Instantiate two independent plotting// objects. Control plotting parameters for
// the first object. Accept default plotting// parameters for the second object.
PlotALot01 plotObjectA =new PlotALot01("A",158,237,36,5,4,4);
PlotALot01 plotObjectB = new PlotALot01("B");//Feed the data to the first plotting object.for(int cnt = 0;cnt<275;cnt++){
//Plot some white random noise in the first// object using specified plotting
// parameters. Note, that fifteen of the// following values are not random. Seven
// values are set to 0,0,25,-25,25,0,0// specifically to confirm the proper
// transition from the end of one page to// the beginning of the next page. Eight
// values are set to 0,0,20,20,-20,-20,0,0// to confirm the proper transition from
// one trace to the next trace on the same// page. Note that these are the correct
// values for an AWT Frame object under// WinXP. However, a Frame may have
// different inset values on other// operating systems, which may cause these
// specific values to be incorrect.if(cnt == 147){
plotObjectA.feedData(0);
}else if(cnt == 148){plotObjectA.feedData(0);
}else if(cnt == 149){plotObjectA.feedData(25);
}else if(cnt == 150){plotObjectA.feedData(-25);
}else if(cnt == 151){plotObjectA.feedData(25);
}else if(cnt == 152){plotObjectA.feedData(0);
}else if(cnt == 153){plotObjectA.feedData(0);
}else if(cnt == 26){plotObjectA.feedData(0);
}else if(cnt == 27){plotObjectA.feedData(0);
}else if(cnt == 28){plotObjectA.feedData(20);
}else if(cnt == 29){plotObjectA.feedData(20);
}else if(cnt == 30){plotObjectA.feedData(-20);
}else if(cnt == 31){plotObjectA.feedData(-20);
}else if(cnt == 32){plotObjectA.feedData(0);
}else if(cnt == 33){plotObjectA.feedData(0);
}else{plotObjectA.feedData(
(Math.random() - 0.5)*25);}//end else
}//end for loop//Cause the data to be plotted.
plotObjectA.plotData(401,0);//Plot white random noise in the second// plotting object using default plotting
// parameters.//Feed the data to the second plotting
// object.for(int cnt = 0;cnt<2600;cnt++){
plotObjectB.feedData((Math.random() - 0.5)*25);
}//end for loop//Cause the data to be plotted.
plotObjectB.plotData();}//end main//-------------------------------------------//
String title;int frameWidth;
int frameHeight;int traceSpacing;//pixels between traces
int sampSpacing;//pixels between samplesint ovalWidth;//width of sample marking oval
int ovalHeight;//height of sample marking ovalint tracesPerPage;int samplesPerPage;
int pageCounter = 0;int sampleCounter = 0;
ArrayList<Page>pageLinks =
new ArrayList<Page>();//There are two overloaded versions of the
// constructor for this class. This// overloaded version accepts several incoming
// parameters allowing the user to control// various aspects of the plotting format. A
// different overloaded version accepts a title// string only and sets all of the plotting
// parameters to default values.PlotALot01(String title,//Frame title
int frameWidth,//in pixelsint frameHeight,//in pixels
int traceSpacing,//in pixelsint sampSpace,//in pixels per sample
int ovalWidth,//sample marker widthint ovalHeight)//sample marker hite
{//constructor//Specify sampSpace as pixels per sample.
// Should never be less than 1. Convert to// pixels between samples for purposes of
// computation.this.title = title;
this.frameWidth = frameWidth;this.frameHeight = frameHeight;
this.traceSpacing = traceSpacing;//Convert to pixels between samples.
this.sampSpacing = sampSpace - 1;this.ovalWidth = ovalWidth;
this.ovalHeight = ovalHeight;//The following object is instantiated solely
// to provide information about the width and// height of the canvas. This information is
// used to compute a variety of other// important values.
Page tempPage = new Page(title);int canvasWidth = tempPage.canvas.getWidth();
int canvasHeight =tempPage.canvas.getHeight();
//Display information about this plotting// object.
System.out.println("\nTitle: " + title);System.out.println(
"Frame width: " + tempPage.getWidth());System.out.println(
"Frame height: " + tempPage.getHeight());System.out.println(
"Page width: " + canvasWidth);System.out.println(
"Page height: " + canvasHeight);System.out.println(
"Trace spacing: " + traceSpacing);System.out.println(
"Sample spacing: " + (sampSpacing + 1));if(sampSpacing<0){
System.out.println("Terminating");System.exit(0);
}//end if//Get rid of this temporary page.
tempPage.dispose();//Now compute the remaining important values.
tracesPerPage =(canvasHeight - traceSpacing/2)/
traceSpacing;System.out.println("Traces per page: "
+ tracesPerPage);if(tracesPerPage == 0){
System.out.println("Terminating program");System.exit(0);
}//end ifsamplesPerPage = canvasWidth * tracesPerPage/
(sampSpacing + 1);System.out.println("Samples per page: "
+ samplesPerPage);//Now instantiate the first usable Page
// object and store its reference in the// list.
pageLinks.add(new Page(title));}//end constructor
//-------------------------------------------//PlotALot01(String title){//call the other overloaded constructor
// passing default values for all but the// title.
this(title,400,410,50,2,2,2);}//end overloaded constructor
//-------------------------------------------////call this method for each point to be// plotted.
void feedData(double val){if((sampleCounter) == samplesPerPage){
//if the page is full, increment the page// counter, create a new empty page, and
// reset the sample counter.pageCounter++;
sampleCounter = 0;pageLinks.add(new Page(title));
}//end if//Store the sample value in the MyCanvas
// object to be used later to paint the// screen. Then increment the sample
// counter. The sample value passes through// the page object into the current MyCanvas
// object.pageLinks.get(pageCounter).putData(
val,sampleCounter);sampleCounter++;
}//end feedData//-------------------------------------------////There are two overloaded versions of the
// plotData method. One version allows the// user to specify the location on the screen
// where the stack of plotted pages will// appear. The other version places the stack
// in the upper left corner of the screen.//call one of the overloaded versions of// this method once when all of the data has
// been fed to the plotting object in order to// rearrange the order of the pages with
// page 0 at the top of the stack on the// screen.//For this overloaded version, specify xCoor
// and yCoor to control the location of the// stack on the screen. Values of 0,0 will
// place the stack at the upper left corner of// the screen. Also see the other overloaded
// version, which places the stack at the upper// left corner of the screen by default.
void plotData(int xCoor,int yCoor){Page lastPage =
pageLinks.get(pageLinks.size() - 1);//Delay until last page becomes visible.
while(!lastPage.isVisible()){//Loop until last page becomes visible
}//end while loopPage tempPage = null;//Make all pages invisible
for(int cnt = 0;cnt<(pageLinks.size());
cnt++){tempPage = pageLinks.get(cnt);
tempPage.setVisible(false);}//end for loop//Now make all pages visible in reverse order
// so that page 0 will be on top of the// stack on the screen.
for(int cnt = pageLinks.size() - 1;cnt>= 0;
cnt--){tempPage = pageLinks.get(cnt);
tempPage.setLocation(xCoor,yCoor);tempPage.setVisible(true);
}//end for loop}//end plotData(int xCoor,int yCoor)
//-------------------------------------------////This overloaded version of the method causes// the stack to be located in the upper left
// corner of the screen by defaultvoid plotData(){
plotData(0,0);//call overloaded version}//end plotData()
//-------------------------------------------////Inner class. A PlotALot01 object may
// have as many Page objects as are required// to plot all of the data values. The
// reference to each Page object is stored
// in an ArrayList object belonging to the// PlotALot01 object.
class Page extends Frame{MyCanvas canvas;
int sampleCounter;Page(String title){//constructor
canvas = new MyCanvas();add(canvas);
setSize(frameWidth,frameHeight);setTitle(title + " Page: " + pageCounter);
setVisible(true);//---------------------------------------////Anonymous inner class to terminate the
// program when the user clicks the close// button on the Frame.
addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent e){
System.exit(0);//terminate program}//end windowClosing()
}//end WindowAdapter);//end addWindowListener
//---------------------------------------//}//end constructor
//=========================================////This method receives a sample value of type// double and stores it in an array object
// belonging to the MyCanvas object.void putData(double sampleValue,
int sampleCounter){canvas.data[sampleCounter] = sampleValue;//Save the sample counter in an instance
// variable to make it available to the// overridden paint method. This value is
// needed by the paint method so it will// know how many samples to plot on the
// final page which probably won't be full.this.sampleCounter = sampleCounter;
}//end putData//=========================================////Inner class
class MyCanvas extends Canvas{double [] data =new double[samplesPerPage];//Override the paint methodpublic void paint(Graphics g){
//Draw horizontal axes, one for each// trace.
for(int cnt = 0;cnt<tracesPerPage;
cnt++){g.drawLine(0,
(cnt+1)*traceSpacing,this.getWidth(),
(cnt+1)*traceSpacing);}//end for loop//Plot the points if there are any to be
// plotted.if(sampleCounter>0){
for(int cnt = 0;cnt<= sampleCounter;
cnt++){//Compute a vertical offset to locate
// the data on a particular trace.int yOffset =
(1 + cnt*(sampSpacing + 1)/this.getWidth())*traceSpacing;
//Draw an oval centered on the sample// value to mark the sample. It is
// best if the dimensions of the oval// are evenly divisible by 2 for
// centering purposes.//Reverse the sign on sample value to
// cause positive sample values to go// up on the screen
g.drawOval(cnt*(sampSpacing + 1)%this.getWidth() - ovalWidth/2,
yOffset - (int)data[cnt]- ovalHeight/2,ovalWidth,
ovalHeight);//Connect the sample values with// straight lines. Do not draw a
// line connecting the last sample in// one trace to the first sample in
// the next trace.if(cnt*(sampSpacing + 1)%
this.getWidth()>=
sampSpacing + 1){g.drawLine(
(cnt - 1)*(sampSpacing + 1)%this.getWidth(),
yOffset - (int)data[cnt-1],
cnt*(sampSpacing + 1)%this.getWidth(),
yOffset - (int)data[cnt]);
}//end if}//end for loop
}//end if for sampleCounter>0
}//end overridden paint method}//end inner class MyCanvas
}//end inner class Page}//end class PlotALot01
//=============================================// |
Notification Switch
Would you like to follow the 'Digital signal processing - dsp' conversation and receive update notifications?
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|