<< Chapter < Page Chapter >> Page >
Derives basic properties of the Laplace transform.

Properties of the laplace transform

The properties associated with the Laplace transform are similar to those of the Fourier transform. First, let's set define some notation, we will use the notation L { } to denote the Laplace transform operation. Therefore we can write X ( s ) = L x ( t ) and x ( t ) = L - 1 X ( s ) for the forward and inverse Laplace transforms, respectively. We can also use the transform pair notation used earlier:

x ( t ) X ( s )

With this notation defined, lets now look at some properties.

Linearity

Given that x 1 ( t ) X 1 ( s ) and x 2 ( t ) X 2 ( s ) then for any constants α and β , we have

α x 1 ( t ) + β x 2 ( t ) α X 1 ( s ) + β X 2 ( s )

The linearity property follows easily using the definition of the Laplace transform.

Time delay

The reason we call this the time delay property rather than the time shift property is that the time shift must be positive, i.e. if τ > 0 , then x ( t - τ ) corresponds to a delay. If τ < 0 then we would not be able to use the single-sided Laplace transform because we would have a lower integration limit of τ , which is less than zero. To derive the property, lets evaluate the Laplace transform of the time-delayed signal

L x ( t - τ ) = 0 x ( t - τ ) e - s t d t

Letting γ = t - τ leads to t = γ + τ and d t = d γ . Substituting these quantities into [link] gives

L x ( t - τ ) = - τ x ( γ ) e - s ( γ + τ ) d γ = e - s τ - τ x ( γ ) e - s γ d γ = e - s τ - τ 0 x ( γ ) e - s γ d γ + e - s τ 0 x ( γ ) e - s γ d γ

where we note that the first integral in the last line is zero since x ( t ) = 0 , t < 0 . Therefore the time delay property is given by

L x ( t - τ ) = e - s τ X ( s )

S-shift

This property is the Laplace transform corresponds to the frequency shift property of the Fourier transform. In fact, the derivation of the s -shift property is virtually identical to that of the frequency shift property.

L e - a t x ( t ) = 0 e - a t x ( t ) e - s t d t = 0 x ( t ) e - ( a + s ) t d t = 0 x ( t ) e - ( a + σ + j Ω ) t d t = X ( s + a )

The s -shift property also alters the region of convergence of the Laplace transform. If the region of convergence for X ( s ) is σ > σ m i n , then the region of convergence for L e - a t x ( t ) is σ > σ m i n - Re ( a ) .

Multiplication by t

Let's begin by taking the derivative of the Laplace transform:

d X ( s ) d s = d d s 0 x ( t ) e - s t d t = 0 x ( t ) d d s e - s t d t = - 0 t x ( t ) e - s t d t

So we can write

L t x ( t ) = - d X ( s ) d s

This idea can be extended to multiplication by t n . Letting y ( t ) = t x ( t ) , if follows that

t y ( t ) - d Y ( s ) d s d 2 X ( s ) d s 2

Proceeding in this manner, we find that

t n x ( t ) ( - 1 ) n d n X ( s ) d s n

Time scaling

The time scaling property for the Laplace transform is similar to that of the Fourier transform:

L x ( α t ) = 0 x ( α t ) e - s t d t = 1 α 0 x ( γ ) e - s α γ d γ = 1 α X s α

where in the second equality, we made the substitution t = γ α and d t = d γ α .

Convolution

The derivation of the convolution property for the Laplace transform is virtually identical to that of the Fourier transform. We begin with

L - x ( τ ) h ( t - τ ) d τ = - x ( τ ) L h ( t - τ ) d τ

Applying the time-delay property of the Laplace transform gives

- x ( τ ) L h ( t - τ ) d τ = H ( s ) - x ( τ ) e - s τ d τ = H ( s ) X ( s )

If h ( t ) is the the impulse response of a linear time-invariant system, then we call H ( s ) the system function of the system. The frequency response results by setting s = j Ω in H ( s ) . The system function provides us with a very powerful means of determining the output of a linear time-invariant filter given the input signal. It will also enable us to determine a means of establishing the stability We will discuss stability shortly of a linear-time invariant filter, something which was not possible with the frequency response.

Questions & Answers

what is microbiology
Agebe Reply
What is a cell
Odelana Reply
what is cell
Mohammed
how does Neisseria cause meningitis
Nyibol Reply
what is microbiologist
Muhammad Reply
what is errata
Muhammad
is the branch of biology that deals with the study of microorganisms.
Ntefuni Reply
What is microbiology
Mercy Reply
studies of microbes
Louisiaste
when we takee the specimen which lumbar,spin,
Ziyad Reply
How bacteria create energy to survive?
Muhamad Reply
Bacteria doesn't produce energy they are dependent upon their substrate in case of lack of nutrients they are able to make spores which helps them to sustain in harsh environments
_Adnan
But not all bacteria make spores, l mean Eukaryotic cells have Mitochondria which acts as powerhouse for them, since bacteria don't have it, what is the substitution for it?
Muhamad
they make spores
Louisiaste
what is sporadic nd endemic, epidemic
Aminu Reply
the significance of food webs for disease transmission
Abreham
food webs brings about an infection as an individual depends on number of diseased foods or carriers dully.
Mark
explain assimilatory nitrate reduction
Esinniobiwa Reply
Assimilatory nitrate reduction is a process that occurs in some microorganisms, such as bacteria and archaea, in which nitrate (NO3-) is reduced to nitrite (NO2-), and then further reduced to ammonia (NH3).
Elkana
This process is called assimilatory nitrate reduction because the nitrogen that is produced is incorporated in the cells of microorganisms where it can be used in the synthesis of amino acids and other nitrogen products
Elkana
Examples of thermophilic organisms
Shu Reply
Give Examples of thermophilic organisms
Shu
advantages of normal Flora to the host
Micheal Reply
Prevent foreign microbes to the host
Abubakar
they provide healthier benefits to their hosts
ayesha
They are friends to host only when Host immune system is strong and become enemies when the host immune system is weakened . very bad relationship!
Mark
what is cell
faisal Reply
cell is the smallest unit of life
Fauziya
cell is the smallest unit of life
Akanni
ok
Innocent
cell is the structural and functional unit of life
Hasan
is the fundamental units of Life
Musa
what are emergency diseases
Micheal Reply
There are nothing like emergency disease but there are some common medical emergency which can occur simultaneously like Bleeding,heart attack,Breathing difficulties,severe pain heart stock.Hope you will get my point .Have a nice day ❣️
_Adnan
define infection ,prevention and control
Innocent
I think infection prevention and control is the avoidance of all things we do that gives out break of infections and promotion of health practices that promote life
Lubega
Heyy Lubega hussein where are u from?
_Adnan
en français
Adama
which site have a normal flora
ESTHER Reply
Many sites of the body have it Skin Nasal cavity Oral cavity Gastro intestinal tract
Safaa
skin
Asiina
skin,Oral,Nasal,GIt
Sadik
How can Commensal can Bacteria change into pathogen?
Sadik
How can Commensal Bacteria change into pathogen?
Sadik
all
Tesfaye
by fussion
Asiina
what are the advantages of normal Flora to the host
Micheal
what are the ways of control and prevention of nosocomial infection in the hospital
Micheal
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Signals, systems, and society. OpenStax CNX. Oct 07, 2012 Download for free at http://cnx.org/content/col10965/1.15
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Signals, systems, and society' conversation and receive update notifications?

Ask