In undirected, unweighted graphs the threshold(
k ) is the minimum number of inputs a neuron needs in order to become excited
The excitation map, e(x,k)
let
X be a subgraph in
G :
Where
x is a binary vector representing the presence (1) or absence (0) of a neuron.
x is an invariant set if:
Graph theory and cell assemblies
Using tools from graph theory, we are able to link a certain class of Palm's cell assemblies, which we will call a
k -assembly, to the closure of a minimal
k -core. Using MATLAB, we are able to find a minimal
k -core and it's closure allowing us to find a
k -assembly in any given network of neurons.
k -cores
k -cores are a concept in graph theory that has been widely used and studied by many graph theorists for locating cohesive subsets in a given graph. A
k -core can be defined as:
Given graph
G , subgraph
X is a
k -core if every node in
X has at lease
k neighbors in
X . A
k -core can be described as minimal if no proper subset of the
k -core is also a
k -core.
Algorithms for finding a
k -assembly
The closure (the invariant set generated by iterating the e map) of a minimal
k -core is a
k -assembly
One type of cell assembly, we will call a
k -assembly, is the closure of a minimal
k -core. In order to find these
k -assemblies, we needed to develop a method for finding minimal
k -cores and their closures in any given network of neurons.
Finding minimal
k -cores:
bintprog is a built in MATLAB function that Þnds an optimal solution to binary integer programming problems of the following form:
bintprog arguments:
f : coefficients of the variables of the objective functions
: Using the threshold inequality we can find
A :
bintprog minimizes
constrained to
. Because x=0 satisfies the inequality we must add an additional constraint
Algorithm examples
bintprog Example
Given the following graph, its corresponding adjacency matrix and threshold of
,
bintprog can find a minimal 2-core:
bintprog arguments:
bintprog returns a vector,
x , indicating which nodes are in the minimal
k -core:
{1,2,6} is the minimal 2-core found by
bintprog
There are, however, many other minimal
k -cores in this set of neurons such as: {3,4,5} and {2,5,6}. Our goal for the future is to find some method that enables
bintprog to find all of the minimal
k -cores in a given network allowing us to find all of the
k -assemblies in that network.
Closure example
We will use the same graph as the previous
bintprog example:
Create a subset,
x . We will use the minimal 2-core found by
bintprog :
Find
:
Because
we must apply
again:
Even though
, we can see that because the entire graph is excited, it will keep exciting itself, thus generating an invariant set giving us a
k -assembly:
Finding
k -assemblies
Future work for finding cell assemblies
In order to find more cell assemblies in any given network of neurons, we have come up with a few methods of finding other minimal
k -cores in a network of neurons:
Alter the arguments of
bintprog
We have altered with the coefficients of the objective function where we would increase the value for nodes already found in a previous minimal
k -core. This method has, however, proved to be exhaustive in that we must increase the value of the objective coefficients with all possible combinations of nodes of the previously found minimal
k -cores to ensure that all the minimal
k -cores of any given graph are located.
Translate other graph theoretical algorithms to fit minimal
k -cores
We hope to use algorithms in graph theory for finding other types of subgraphs, such as a maximal clique, and translate them to fit our problem of finding all of the minimal
k -cores of any given graph.
Use probability in random graphs
Using probability may allow us to figure out how many minimal
k -cores a given graph may support as well as where they might be, allowing us to constrain other exhaustive methods of finding minimal
k -cores.
Conclusion
This module has shown how to translate the problem of finding cell assemblies in a network of neurons into a binary integer programming problem. It has shown a clear connection between cell assemblies and graph theory and also how to find at least one cell assembly in any given network of neurons. Future work for this problem includes how to find more cell assemblies in a network of neurons.
Acknowledgements
I would like to give a big thanks to Dr. Steve Cox and Dr. Illya Hicks for guiding us through our project of finding cell assemblies. Also thanks to the REU students, Karina Aliaga, Shaunak Das, and Diane Taylor who I collaborated with on this project. Lastly I would like to thank NSF and the VIGRE program for funding me under the NSF VIGRE Grant DMS-0240058.
References
1. Hebb, Donald. (1949) The Organization of Behavior. (New York: John Wiley).
2. Palm, Gunther. (1981) Towards a Theory of Cell Assemblies. Biological Cybernetics 39, pp. 181-194.
Questions & Answers
A golfer on a fairway is 70 m away from the green, which sits below the level of the fairway by 20 m. If the golfer hits the ball at an angle of 40° with an initial speed of 20 m/s, how close to the green does she come?
A mouse of mass 200 g falls 100 m down a vertical mine shaft and lands at the bottom with a speed of 8.0 m/s. During its fall, how much work is done on the mouse by air resistance
Chemistry is a branch of science that deals with the study of matter,it composition,it structure and the changes it undergoes
Adjei
please, I'm a physics student and I need help in physics
Adjanou
chemistry could also be understood like the sexual attraction/repulsion of the male and female elements. the reaction varies depending on the energy differences of each given gender. + masculine -female.
Pedro
A ball is thrown straight up.it passes a 2.0m high window 7.50 m off the ground on it path up and takes 1.30 s to go past the window.what was the ball initial velocity
2. A sled plus passenger with total mass 50 kg is pulled 20 m across the snow (0.20) at constant velocity by a force directed 25° above the horizontal. Calculate (a) the work of the applied force, (b) the work of friction, and (c) the total work.
you have been hired as an espert witness in a court case involving an automobile accident. the accident involved car A of mass 1500kg which crashed into stationary car B of mass 1100kg. the driver of car A applied his brakes 15 m before he skidded and crashed into car B. after the collision, car A s
can someone explain to me, an ignorant high school student, why the trend of the graph doesn't follow the fact that the higher frequency a sound wave is, the more power it is, hence, making me think the phons output would follow this general trend?
Nevermind i just realied that the graph is the phons output for a person with normal hearing and not just the phons output of the sound waves power, I should read the entire thing next time
Joseph
Follow up question, does anyone know where I can find a graph that accuretly depicts the actual relative "power" output of sound over its frequency instead of just humans hearing
Joseph
"Generation of electrical energy from sound energy | IEEE Conference Publication | IEEE Xplore" ***ieeexplore.ieee.org/document/7150687?reload=true
A string is 3.00 m long with a mass of 5.00 g. The string is held taut with a tension of 500.00 N applied to the string. A pulse is sent down the string. How long does it take the pulse to travel the 3.00 m of the string?