8.6 Collisions of point masses in two dimensions  (Page 2/5)

But because particle 2 is initially at rest, this equation becomes

The components of the velocities along the $x$ -axis have the form $v\text{cos}\theta$ . Because particle 1 initially moves along the $x$ -axis, we find $v_{1x}=v_1$ .

Conservation of momentum along the $x$ -axis gives the following equation:

where ${\theta }_1$ and ${\theta }_2$ are as shown in [link] .

Along the $y$ -axis, the equation for conservation of momentum is

or

But $v_{1y}$ is zero, because particle 1 initially moves along the $x$ -axis. Because particle 2 is initially at rest, $v_{2y}$ is also zero. The equation for conservation of momentum along the $y$ -axis becomes

The components of the velocities along the $y$ -axis have the form $v\text{sin}\theta$ .

Thus, conservation of momentum along the $y$ -axis gives the following equation:

The equations of conservation of momentum along the $x$ -axis and $y$ -axis are very useful in analyzing two-dimensional collisions of particles, where one is originally stationary (a common laboratory situation). But two equations can only be used to find two unknowns, and so other data may be necessary when collision experiments are used to explore nature at the subatomic level.

Determining the final velocity of an unseen object from the scattering of another object

Suppose the following experiment is performed. A 0.250-kg object $\left(m_1\right)$ is slid on a frictionless surface into a dark room, where it strikes an initially stationary object with mass of 0.400 kg $\left(m_2\right)$ . The 0.250-kg object emerges from the room at an angle of $\text{45}\text{.}\mathrm{0º}$ with its incoming direction.

The speed of the 0.250-kg object is originally 2.00 m/s and is 1.50 m/s after the collision. Calculate the magnitude and direction of the velocity $({v\prime }_2^{}$ and ${\theta }_2)$ of the 0.400-kg object after the collision.

Strategy

Momentum is conserved because the surface is frictionless. The coordinate system shown in [link] is one in which $m_2$ is originally at rest and the initial velocity is parallel to the $x$ -axis, so that conservation of momentum along the $x$ - and $y$ -axes is applicable.

Everything is known in these equations except ${v\prime }_2^{}$ and ${\theta }_2$ , which are precisely the quantities we wish to find. We can find two unknowns because we have two independent equations: the equations describing the conservation of momentum in the $x$ - and $y$ -directions.

Solution

Solving $m_1{v}_1=m_1{v\prime }_1^{}\text{cos}{\theta }_1+m_2{v\prime }_2^{}\text{cos}{\theta }_2$ for $v_2^{\prime }\text{cos}{\theta }_2$ and $0=m_1{v\prime }_1^{}\text{sin}{\theta }_1+m_2{v\prime }_2^{}\text{sin}{\theta }_2$ for ${v\prime }_2^{}\text{sin}{\theta }_2$ and taking the ratio yields an equation (in which θ ₂ is the only unknown quantity. Applying the identity $\left(\text{tan}\theta =\frac{\text{sin}\theta }{\text{cos}\theta }\right)$ , we obtain:

Entering known values into the previous equation gives

Thus,

Angles are defined as positive in the counter clockwise direction, so this angle indicates that $m_2$ is scattered to the right in [link] , as expected (this angle is in the fourth quadrant). Either equation for the $x$ - or $y$ -axis can now be used to solve for ${v\prime }_2$ , but the latter equation is easiest because it has fewer terms.