<< Chapter < Page Chapter >> Page >

The concept

In the mid sixties Lotus were trying to distance themselves from their kit-car heritage. The growing respectability of their productions cars (in particular the Elan) meant that a new class of customer was buying Lotus that didn’t want to be associated with the Lotus Seven ( [link] ). As a consequence Lotus’ founder, Colin Chapman, decided that there should be a replacement for the Seven. Given Lotus’ on track success, it was reasonable that this new car should feature a mid-engine rear wheel drive design giving the customer a link to the highly successful F1 cars of the time. However, the resulting car, the Europa ( [link] ), was produced by the main Lotus Cars factory rather than by Lotus Components, the division responsible for the Seven.

The Lotus Seven S3 predecessor to the S4.
What was to be the “new Seven” evolved into the Europa S1.

In addition to the Seven, Lotus Components were responsible for the manufacture and sales of racing cars. Unfortunately, the race car business is highly seasonal, and as such Lotus Components needed to have a steady supply of income, and it was this role that the Seven filled. However, while other specialty race car manufacturers could be more flexible with expenses during the off-season, Lotus Components had to provide its share of the corporate Group Lotus overhead, including such things as the company airplane. The President of Lotus Components at this time, Mike Warner ( [link] ), decided that rationalization and cost cutting was needed.

Mike Warner President of Lotus Components (a.k.a. Lotus Racing).

A detailed study of the manufacturing process of the Seven showed a number of areas that costs could be saved. This led to the development of the Series 3 Seven. However, Warner felt these savings did not go far enough. In particular each Seven lost about £100. Chassis a main cost, since it was complex and time consuming to make. Warner even tried to put more workers onto each Seven, but found they actually got in each other’s way and slowed the overall production rate. In addition to the cost issues, Warner believed there was a wider market for the Severn if it could be made more accessible to the sports car buyer, who may be ordinarily attracted to MG or Triumph. With all this information Warner went to Lotus founder Colin Chapman ( [link] ) and the Lotus Board with a proposal to rationalize the Seven. In 1969 Warner was given the green light for the Seven development.

Lotus Cars founder Colin Chapman (1928 - 1982).

Development

To this day, it is not clear if Colin Chapman had any input to the design of the S4. Certainly, it is suggestive that he didn’t given his shocked reaction in seeing the prototype. However, it has been suggested that it would be unlikely that he would have known anything of its gestation. Chapman certainly had to approve the budget of given £5000 provided for the development program. Later, in 1978, Chapman admitted that “I was so busy with other things that I more or less left Mike Warner to run the business on his own and he did this as a sort of secret project out the back”.

Despite the uncertainty of Chapman’s knowledge, it is known that Warner had a false wall constructed in the Lotus Components workshop so that development could be undertaken without interruption. The development team was limited to Peter Lucas and Alan Barrett. Over a period of (appropriately) seven months they set about designing a car essentially from scratch while keeping the overall shape and concept of the Seven intact ( [link] ). The fact that despite its name (“Seven”) this was a new car is evident from the use of a new Type number (60) for the resulting car. In contrast, the second generation Elise retained the 111 type number even though it was dramatically different to the S1 model.

The Type 60 Lotus Seven S4.

Unveiling

The first showing of the S4 was to the Lotus Board and various key employees in October 1969 in one of the hangers at the Lotus factory in Hethel. It is recorded that it was at this event that Chapman was heard to exclaim to his wife, “Christ, Hazel, they’ve built a new bloody car”.

Despite the shock of a new car, it was clear that Warner’s team had done a good job, and inspite of the unusual unveiling ceremony it was decided to productionize the car. Although as a result of this incident Chapman and Warner were not on speaking terms, Chapman did provide significant later input. Arriving at the same time to the factory one morning, Chapman looked at Warner’s S4 prototype and said “Well I suppose if we’re going to build the bloody thing I’d better drive it.” Chapman proceeded to drive the S4 around the Hethel test track with Warner taking notes and immediately told Warner of “twenty five points we were already working on improving and ten others that we should have been”.

The Seven had an unveiled to journalists at the Grovesnor Hotel in London in February 1970. This event proved even more trying that the unveiling to the Board. Warner and Chapman got into an argument and Warner stormed out before the showing. As a result Chapman and Marketing Director Graham Arnold had to muddle through the presentation. The Seven S4 was unveiled to the public at the Geneva Motor Show in March 1970.

Bibliography

  • J. Coulter, Lotus Seven , Amadeus Press (1995).
  • W. Taylor, The Lotus Book , Coterrie Press (1998).

Questions & Answers

A golfer on a fairway is 70 m away from the green, which sits below the level of the fairway by 20 m. If the golfer hits the ball at an angle of 40° with an initial speed of 20 m/s, how close to the green does she come?
Aislinn Reply
cm
tijani
what is titration
John Reply
what is physics
Siyaka Reply
A mouse of mass 200 g falls 100 m down a vertical mine shaft and lands at the bottom with a speed of 8.0 m/s. During its fall, how much work is done on the mouse by air resistance
Jude Reply
Can you compute that for me. Ty
Jude
what is the dimension formula of energy?
David Reply
what is viscosity?
David
what is inorganic
emma Reply
what is chemistry
Youesf Reply
what is inorganic
emma
Chemistry is a branch of science that deals with the study of matter,it composition,it structure and the changes it undergoes
Adjei
please, I'm a physics student and I need help in physics
Adjanou
chemistry could also be understood like the sexual attraction/repulsion of the male and female elements. the reaction varies depending on the energy differences of each given gender. + masculine -female.
Pedro
A ball is thrown straight up.it passes a 2.0m high window 7.50 m off the ground on it path up and takes 1.30 s to go past the window.what was the ball initial velocity
Krampah Reply
2. A sled plus passenger with total mass 50 kg is pulled 20 m across the snow (0.20) at constant velocity by a force directed 25° above the horizontal. Calculate (a) the work of the applied force, (b) the work of friction, and (c) the total work.
Sahid Reply
you have been hired as an espert witness in a court case involving an automobile accident. the accident involved car A of mass 1500kg which crashed into stationary car B of mass 1100kg. the driver of car A applied his brakes 15 m before he skidded and crashed into car B. after the collision, car A s
Samuel Reply
can someone explain to me, an ignorant high school student, why the trend of the graph doesn't follow the fact that the higher frequency a sound wave is, the more power it is, hence, making me think the phons output would follow this general trend?
Joseph Reply
Nevermind i just realied that the graph is the phons output for a person with normal hearing and not just the phons output of the sound waves power, I should read the entire thing next time
Joseph
Follow up question, does anyone know where I can find a graph that accuretly depicts the actual relative "power" output of sound over its frequency instead of just humans hearing
Joseph
"Generation of electrical energy from sound energy | IEEE Conference Publication | IEEE Xplore" ***ieeexplore.ieee.org/document/7150687?reload=true
Ryan
what's motion
Maurice Reply
what are the types of wave
Maurice
answer
Magreth
progressive wave
Magreth
hello friend how are you
Muhammad Reply
fine, how about you?
Mohammed
hi
Mujahid
A string is 3.00 m long with a mass of 5.00 g. The string is held taut with a tension of 500.00 N applied to the string. A pulse is sent down the string. How long does it take the pulse to travel the 3.00 m of the string?
yasuo Reply
Who can show me the full solution in this problem?
Reofrir Reply
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Lotus seven s4 (type 60): design, restoration, and maintenance. OpenStax CNX. Jun 07, 2013 Download for free at http://cnx.org/content/col11418/1.19
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Lotus seven s4 (type 60): design, restoration, and maintenance' conversation and receive update notifications?

Ask